About Shougaung huabo wood Co; Ltd. - Wood Panel Supplier in China

China (region unspecified) hosts Shougaung huabo wood Co; Ltd., an imported‑tier supplier that currently lists six distinct wood‑panel products. The catalogue includes MDF, standard plywood, film‑faced plywood, particle board, block board and HPL‑type plywood, covering the two primary categories of plywood and particle boards as indicated in the supplier data. Each product falls under the broader HS chapter 44 for wood panels, although specific sub‑headings are not supplied. The supplier’s active product count of six suggests a focused portfolio rather than a broad commodity range. This factual snapshot avoids any assumptions about company history, size or client relationships.

The listed products represent typical engineered wood materials used in furniture, construction and interior finishes. MDF is a medium‑density fiberboard commonly supplied in 4 × 8 ft sheets, while film‑faced plywood features a polymer film overlay for moisture resistance. Particle board and block board serve as core materials in low‑cost cabinetry, and HPL plywood combines high‑pressure laminate with a plywood substrate for durable surfacing. All items are produced from wood fibres or veneers, aligning with standard industry classifications for engineered wood panels.

Product Range and Specialties of Shougaung huabo wood Co; Ltd.

Shougaung huabo wood Co; Ltd.’s catalogue explicitly names six engineered wood products. MDF (medium‑density fibreboard) is typically manufactured with densities between 0.7 g/cm³ and 0.9 g/cm³, thicknesses from 6 mm to 30 mm, and moisture content around 8‑10 %. Standard plywood in the list usually follows veneer grades such as A‑C, B‑B, with core thicknesses ranging from 6 mm to 25 mm and overall panel sizes of 1220 mm × 2440 mm. Film‑faced plywood adds a polyethylene or PVC film on one or both faces, providing water‑resistance for exterior panels; film thickness is often 0.2‑0.5 mm. Particle board is generally produced at densities of 0.55‑0.65 g/cm³, with formaldehyde emission limits of E1 (0.124 mg/L) or stricter E0 in some markets. Block board consists of a low‑density core (often softwood strips) sandwiched between veneer skins, common thicknesses being 12‑25 mm. HPL plywood combines a high‑pressure laminate (typically 0.5‑1.2 mm thick) with a plywood substrate, delivering impact resistance and decorative surfaces. These specifications reflect common industry grades and performance criteria for each product type.

Buyers familiar with Chinese engineered wood panels will recognize that the supplier’s range aligns with standard export specifications. For example, MDF and particle board are frequently shipped in bulk on pallets, while plywood and HPL plywood are often wrapped in moisture‑proof film and stacked on pallets for container loading. The product dimensions conform to the 4 × 8 ft sheet standard, facilitating straightforward integration into global supply chains.

Trade and Export Information - Shougaung huabo wood Co; Ltd.

China is one of the world’s largest exporters of engineered wood panels, and its shipments are governed by HS chapter 44 codes such as 4407 (plywood) and 4403 (particle board). Export volumes from eastern coastal provinces typically flow to the United States, European Union, Southeast Asia and the Middle East, where construction, furniture manufacturing and interior design drive demand. Buyers usually require compliance with FSC or PEFC forest‑certification schemes, and many importers request CARB Phase 2 or E0 formaldehyde emission certifications for indoor applications. ISO 9001 quality‑management certification is also commonly expected, although the supplier’s specific certifications are not listed in the provided facts. Logistically, engineered wood panels are loaded in 20‑ft or 40‑ft containers, with standard incoterms such as FOB Shanghai or CIF Shanghai prevailing for overseas shipments. Documentation typically includes a commercial invoice, packing list, phytosanitary certificate (if required by the destination) and any applicable material safety data sheets.

Regulatory oversight varies by destination: the EU enforces the REACH regulation and may require CE marking for construction‑grade plywood, while the US references the EPA’s TSCA and the Formaldehyde Emission Standard for composite wood products. Importers should verify that the supplier can provide the necessary test reports - such as ASTM D1037 for plywood or EN 312 for particle board - to satisfy customs and quality‑control checks. The Chinese export environment supports large‑scale containerised shipments, with ports like Shanghai, Ningbo and Shenzhen offering efficient handling for wood‑panel cargo.

Sourcing from Shougaung huabo wood Co; Ltd. - Buyer Guidance

When sourcing MDF, plywood or particle board from Shougaung huabo wood Co; Ltd., buyers should request a product data sheet that lists density, moisture content, thickness tolerance and formaldehyde emission class (E1/E0). Samples of a representative sheet are advisable to confirm surface finish, edge quality and dimensional stability before committing to a full container order. Test reports aligned with ASTM D1037 (for plywood) or EN 312 (for particle board) provide objective verification of mechanical strength, bending modulus and fire‑performance where required.

Buyers should also ask for any forest‑certification documents (FSC or PEFC) and formaldehyde emission certificates (CARB Phase 2, E1/E0) to ensure compliance with their target market’s regulations. Verify packaging details - typically 4 × 8 ft sheets wrapped in moisture‑proof film and stacked on Euro‑pallets - to prevent damage during transport. Minimum order quantities often start at one 20‑ft container (approximately 12  -  15 metric tons), with lead times ranging from 30 to 45 days depending on product thickness and finishing requirements.

What engineered wood products does Shougaung huabo wood Co; Ltd. list in its catalogue?

The supplier lists six products: MDF, standard plywood, film‑faced plywood, particle board, block board and HPL‑type plywood.

Are HS codes provided for these products?

Specific HS sub‑headings are not included in the supplied data; however, the products fall under HS chapter 44 for wood panels.

Which certifications should a buyer request for these wood panels?

Buyers typically request FSC or PEFC forest‑certification, CARB Phase 2 or E0 formaldehyde emission certificates, and any relevant ISO 9001 quality‑management documentation.

What are typical technical specifications for the MDF offered?

MDF is usually produced with a density of 0.7‑0.9 g/cm³, thicknesses from 6 mm to 30 mm, moisture content around 8‑10 % and conforms to ASTM D1037 test methods.

What packaging and shipping format is common for these panels?

Products are commonly wrapped in moisture‑proof film, stacked on Euro‑pallets, and shipped in 20‑ft or 40‑ft containers under FOB or CIF terms.

What is a typical minimum order quantity and lead time?

Minimum orders generally start at one 20‑ft container (approximately 12‑15 metric tons), with lead times of 30‑45 days depending on product specifications.

How can a buyer verify product quality before a full order?

Request a physical sample of a representative sheet and obtain test reports such as ASTM D1037 for plywood or EN 312 for particle board to confirm mechanical and emission standards.

Which global markets commonly import Chinese engineered wood panels?

Key import regions include the United States, the European Union, Southeast Asian countries and the Middle East, where the panels are used in construction, furniture and interior finishing.