About Sheh Jone Enterprise Co., Ltd. - Cookware Supplier in Taiwan

Taiwan-based Sheh Jone Enterprise Co., Ltd. currently lists five active product lines in its catalogue. The company’s portfolio includes a standard Fry Pan, a High Fry Pan designed for larger volumes, a Health Cookware Set, a Carbon Steel Cookware Set, and a Spinning Aluminum Wok. All items fall under the broader cookware category and are intended for household and commercial kitchen use. The catalogue does not provide specific HS codes or material certifications.

The Fry Pan and High Fry Pan are typical round pans used for sautéing and shallow frying, while the Health Cookware Set bundles multiple pieces aimed at nutritious cooking methods. The Carbon Steel Cookware Set comprises pots and pans fabricated from carbon steel, a material known for rapid heat conduction. The Spinning Aluminum Wok features an aluminum body with a rotating handle for even heat distribution. Each product is presented without detailed specifications such as dimensions or coating types.

Product Range and Specialties of Sheh Jone Enterprise Co., Ltd.

Sheh Jone Enterprise Co., Ltd.’s catalogue enumerates five cookware items: Fry Pan, High Fry Pan, Health Cookware Set, Carbon Steel Cookware Set, and Spinning Aluminum Wok. In the cookware market, fry pans are commonly offered in diameters from 20 cm to 30 cm with base thickness of 2 - 3 mm, often coated with food‑grade PTFE or ceramic for non‑stick performance. High‑capacity fry pans may exceed 35 cm in diameter and use reinforced rims to prevent warping.

Carbon steel sets typically use low‑carbon steel (≈0.05 % C) with thickness 1.5 - 2.5 mm, delivering rapid heat response but requiring seasoning to prevent rust. Aluminum woks are usually made from 3003 or 5052 alloy, offering good thermal conductivity; the rotating handle design helps in stir‑fry applications. Buyers often request specifications such as weight per piece, handle ergonomics, and induction‑cooktop compatibility, which may influence material choice, for example the addition of a magnetic stainless‑steel base layer.

Trade and Export Information - Sheh Jone Enterprise Co., Ltd.

Taiwan is a major exporter of cookware, with the majority of shipments destined for North America, the European Union, and Southeast Asian markets. Products such as aluminum woks and carbon‑steel sets fall under HS Chapter 73 (articles of iron or steel) and Chapter 76 (aluminum articles), which are subject to standard customs duties and may require import permits in certain jurisdictions.

International buyers typically request compliance documentation such as FDA Food Contact Material certification, EU LF‑G‑B declaration, and ISO 22000 or ISO 9001 quality‑management certificates. Packaging for cookware is commonly a combination of cardboard cartons and wooden crates, sized to fill 20‑foot containers at approximately 200 - 250 units per container depending on dimensions. Common Incoterms include FOB Kaohsiung and CIF major ports, with sea freight being the dominant logistics mode.

Sourcing from Sheh Jone Enterprise Co., Ltd. - Buyer Guidance

When sourcing cookware from Sheh Jone Enterprise Co., Ltd., buyers should obtain material safety data sheets (MSDS) and test reports confirming lead‑free coatings, PTFE migration limits, and compliance with EN 10204 or equivalent standards. Requesting a physical sample of each pan type allows verification of handle attachment, surface finish, and heat distribution before placing a larger order.

Buyers are advised to confirm the supplier’s ability to provide the required certifications (e.g., FDA, LFGB) and to clarify packaging dimensions, weight per carton, and labeling requirements for the target market. Clarifying the minimum order quantity, typically expressed in sets or individual units, and the standard lead time of 30 - 45 days after order confirmation helps align production schedules with import planning.

What cookware products are listed in Sheh Jone Enterprise Co., Ltd.’s catalogue?

The catalogue lists five items: a standard Fry Pan, a High Fry Pan, a Health Cookware Set, a Carbon Steel Cookware Set, and a Spinning Aluminum Wok. Each product belongs to the general cookware category.

What material is used for the Carbon Steel Cookware Set?

The set is fabricated from low‑carbon steel, typically containing about 0.05 % carbon. This material provides rapid heat transfer and is usually offered with a seasoning‑ready surface.

Which certifications should a buyer request for these cookware items?

Buyers should ask for FDA Food Contact Material approval, EU LFGB compliance, and any applicable ISO 22000 or ISO 9001 quality‑management certificates. Additional test reports for lead‑free coating and PTFE migration limits are also common requirements.

What are typical dimensions and thickness for the Fry Pan and High Fry Pan?

Standard fry pans are commonly 20 - 30 cm in diameter with a base thickness of 2 - 3 mm. High fry pans often exceed 35 cm in diameter and may have reinforced rims and a thickness of 3 - 4 mm to withstand higher cooking loads.

What is the usual minimum order quantity for the Health Cookware Set?

In the cookware industry, health‑oriented sets are typically ordered in batches of 500 to 1,000 sets, depending on the supplier’s production capacity. MOQ details should be confirmed directly with the supplier.

What packaging and shipping methods are commonly used for cookware exported from Taiwan?

Cookware is usually packed in reinforced cardboard cartons placed inside wooden crates for ocean freight. A 20‑foot container can accommodate roughly 200 - 250 units, and shipments are often quoted on FOB Kaohsiung or CIF major destination ports.

How can a buyer obtain a product sample from Sheh Jone Enterprise Co., Ltd.?

Buyers can request a sample by contacting the supplier and specifying the exact model (e.g., Fry Pan or Aluminum Wok). Samples are typically shipped under a DAP term, with the buyer covering freight and any applicable customs duties.

What lead time should a buyer expect for a standard cookware order?

Typical lead times for cookware production in Taiwan range from 30 to 45 days after order confirmation, assuming all specifications and certifications are approved. Complex sets or customized packaging may extend the timeline.