About Shandong Wandong Metal Bearing Co., Ltd - Bearing Supplier in China

Shandong Wandong Metal Bearing Co., Ltd is based in China and currently lists five active products. The catalogue focuses exclusively on deep‑groove ball bearings, specifically the 6000 series sizes 6000, 6002, 6004, 6006 and 6008. These bearings belong to the standard bearing family used in electric motors, gearboxes and automotive applications. The supplier’s product list falls under the bearing category and is typically recorded under HS heading 8482 for rolling‑element bearings. No additional product categories are indicated in the supplied data.

Each listed bearing is a deep‑groove ball bearing with an inner diameter ranging from 10 mm (6000) to 20 mm (6008) and a corresponding outer diameter and width as defined by the ISO 15 standard. The series is designed for radial loads and moderate axial loads, and the units are commonly supplied in steel cages with standard chromium steel (100Cr6) balls. The supplier’s catalogue does not specify any certifications, so buyers should verify compliance with relevant standards during procurement.

Product Range and Specialties of Shandong Wandong Metal Bearing Co., Ltd

The supplier offers the five deep‑groove ball bearings of the 6000 series. In industry practice, the 6000 series is available in open, sealed (Z) and double‑sealed (ZZ) configurations, with typical dynamic load ratings (C) from 0.6 kN for 6000 up to 2.2 kN for 6008. Standard precision grades include ABEC 1 to ABEC 9, with most exporters providing ABEC 3 as a baseline.

Buyers usually select bearings based on bore size, load capacity, speed rating (rpm) and lubrication type. For Chinese manufacturers, the common material is high‑carbon chromium steel (AISI 52100) meeting ISO 281 for life rating, and the bearings are often packed in anti‑corrosion paper or poly‑bag sets suitable for 20‑ft or 40‑ft containers.

Trade and Export Information - Shandong Wandong Metal Bearing Co., Ltd

China is a major exporter of rolling‑element bearings, with the 6000 series frequently shipped to automotive assemblers in Southeast Asia, machinery manufacturers in Europe and equipment integrators in North America. Export shipments are recorded under HS chapter 84, heading 8482, and are subject to customs inspection for compliance with safety and environmental regulations.

Typical import requirements include ISO 9001 quality‑management certification, CE marking for European markets, and RoHS compliance for electronic applications. Buyers often request a test report conforming to ISO 281 and a material certificate confirming 100Cr6 steel composition. Shipping is usually arranged on CIF terms, with bearings packed in moisture‑controlled containers to prevent corrosion.

Sourcing from Shandong Wandong Metal Bearing Co., Ltd - Buyer Guidance

When sourcing from Shandong Wandong, buyers should request a product data sheet that lists the bearing’s inner/outer diameter, width, dynamic and static load ratings, and the precision grade. A sample bearing or a third‑party inspection report can verify the steel quality and dimensional tolerances before larger orders.

Confirm the supplier’s ability to provide ISO 9001 or equivalent quality certificates, and clarify the packaging format - whether bearings are supplied in individual anti‑corrosion bags or bulk pallets. Verify the minimum order quantity, typical lead time of 4‑6 weeks for standard 6000‑series units, and the preferred Incoterm for shipment.

What bearing sizes are listed by Shandong Wandong Metal Bearing Co., Ltd?

The catalogue lists five deep‑groove ball bearings in the 6000 series: 6000, 6002, 6004, 6006 and 6008, covering bore diameters from 10 mm to 20 mm. Each size follows the standard dimensional increments defined by ISO 15.

Which industry standards apply to the 6000‑series bearings?

The 6000 series conforms to ISO 15 for dimensions and ISO 281 for life rating. Typical material is AISI 52100 (100Cr6) steel and precision grades range from ABEC 1 to ABEC 9, with ABEC 3 often used as a baseline.

What certifications should a buyer request for these bearings?

Buyers normally request an ISO 9001 quality‑management certificate and a material test report confirming 100Cr6 steel composition. For shipments to Europe, CE marking documentation is also commonly required.

What is the typical packaging for deep‑groove ball bearings from China?

Bearings are usually packed in anti‑corrosion paper or poly‑bags, placed on wooden pallets, and loaded into 20‑ft or 40‑ft containers. Moisture‑absorbing packs are added to protect against rust during transit.

What are common lead times and minimum order quantities?

Standard lead time for the 6000 series is 4‑6 weeks from order confirmation. Many exporters set a minimum order quantity of one full pallet, which can be around 500 units depending on the bearing size.

Which markets import the 6000‑series bearings most frequently?

Key import markets include automotive and industrial equipment manufacturers in Southeast Asia, machinery producers in Europe, and equipment integrators in North America. These regions value the reliability and cost‑effectiveness of Chinese‑made bearings.

How are the bearings classified for customs purposes?

Customs authorities usually classify deep‑groove ball bearings under HS heading 8482, which covers rolling‑element bearings. This classification is used for tariff assessment and import documentation.