About Shandong Fujing Refractory Co., Ltd - Nozzle Supplier in China

Based in China, Shandong Fujing Refractory Co., Ltd lists six active products in its catalogue. The company focuses on refractory materials used in high‑temperature industrial processes. Its catalogue includes Expanded pearlite, Corundum, Nozzle, High alumina brick, Phosphate bonded alumina brick, and Calcined bauxite. These items fall under the broader HS Chapter 68 classification for refractory products. The supplier is classified as an imported, harbor‑tier supplier in the platform’s trust system.

The primary product category highlighted is Nozzle, a component commonly fabricated from high‑temperature resistant ceramics or refractory bricks. The remaining items represent raw refractory minerals and shaped bricks employed in steelmaking, glass melting, and cement kilns. Expanded pearlite is a lightweight aggregate with typical bulk density around 120‑150 kg m‑3. Corundum is supplied in grades up to 99.9 % Al₂O₃ purity. High alumina bricks generally contain 45 - 60 % Al₂O₃ and are rated to 1 600 °C. Calcined bauxite is typically delivered with moisture content below 2 %.

Product Range and Specialties of Shandong Fujing Refractory Co., Ltd

Shandong Fujing’s product range covers both raw refractory minerals and finished bricks. Expanded pearlite is used as a lightweight insulating aggregate, often specified with a bulk density of 120‑180 kg m‑3 and a crushing strength above 1 MPa. Corundum is offered in various grit sizes, with industrial grades reaching 99.9 % Al₂O₃ and hardness of 9 on the Mohs scale. The Nozzle products are generally machined from high‑alumina or phosphate‑bonded bricks, with typical dimensions of 100 mm × 100 mm × 200 mm and a compressive strength exceeding 30 MPa.

High alumina bricks listed are usually formulated with 45 % - 60 % Al₂O₃ and may include silica and magnesia modifiers to achieve thermal shock resistance. Phosphate bonded alumina bricks commonly contain 40 % - 55 % Al₂O₃ with a phosphate binder, delivering a refractoriness under load (RUL) of about 1 550 °C. Calcined bauxite is supplied after calcination at 1 200 °C, resulting in a particle size distribution centered around 0.5 mm and low impurity levels. Industry standards such as EN 13837 for refractory bricks and ASTM C 618 for aggregates are typical reference points for these materials.

Trade and Export Information - Shandong Fujing Refractory Co., Ltd

China is a major exporter of refractory minerals and shaped bricks, with shipments primarily destined for steel, glass, and cement producers in Southeast Asia, the Middle East, and Europe. HS Chapter 68 (Refractory, ceramic and other articles) covers the products listed, and customs authorities often require a commercial invoice, packing list, and a certificate of origin for these items. Buyers frequently request compliance with ISO 9001 quality management and, where applicable, CE marking for EU imports.

Typical packaging for expanded pearlite and calcined bauxite is bulk bag (1 ton) or jumbo bag (1 000 kg) with moisture‑proof liners. Bricks and nozzles are usually palletised on wooden or plastic pallets, wrapped in stretch film, and loaded in 20‑ft or 40‑ft containers. Incoterms such as FOB Shanghai or CIF destination port are common, and freight forwarders handle temperature‑controlled storage if required. Export documentation often includes a test report confirming bulk density, compressive strength, and chemical composition, which aligns with buyer due‑diligence practices.

Sourcing from Shandong Fujing Refractory Co., Ltd - Buyer Guidance

When sourcing from Shandong Fujing, buyers should request material safety data sheets (MSDS) and test reports that detail bulk density, moisture content, chemical analysis, and mechanical strength for each product. For bricks, verification of refractory index, RUL, and dimensions against EN 13837 is advisable. Samples of expanded pearlite and corundum can be requested in 25 kg bags to evaluate bulk properties before placing a full order.

Potential buyers should confirm the supplier’s ability to provide ISO 9001 certification, CE documentation for EU shipments, and any required phytosanitary or customs permits for the destination country. Lead times for refractory bricks typically range from 30 to 45 days after order confirmation, while bulk minerals may be dispatched within 15 days. Minimum order quantities often start at one container load (≈20 ton) for bricks and at 5 ton for loose minerals, but exact MOQ should be negotiated per product.

What types of refractory bricks does Shandong Fujing offer?

The catalogue lists High alumina bricks and Phosphate bonded alumina bricks, both formulated with alumina contents between 40 % and 60 % and designed for temperatures up to 1 600 °C.

Are material specifications such as bulk density or compressive strength available?

Yes, the supplier provides test reports that include bulk density (e.g., 120‑180 kg m‑3 for expanded pearlite) and compressive strength (typically >30 MPa for nozzle bricks).

Which certifications should a buyer verify for these refractory products?

Buyers should request ISO 9001 quality management certification and, for EU imports, CE conformity documentation; additional certifications depend on the buyer’s market requirements.

What are the typical packaging and container sizes for the listed products?

Expanded pearlite, calcined bauxite and corundum are usually shipped in 1‑ton bulk bags or jumbo bags; bricks and nozzles are palletised and loaded in standard 20‑ft or 40‑ft containers.

What is the usual lead time for orders of refractory bricks?

Lead times are generally 30‑45 days after order confirmation, depending on product dimensions and any required custom machining.

Which markets commonly import refractory materials from China?

Major importers include steel plants in Southeast Asia, glass manufacturers in the Middle East, and cement kilns in Eastern Europe, all of which use HS Chapter 68 products.

How can a buyer obtain a sample before placing a full order?

The supplier can provide small‑quantity samples, such as a 25 kg bag of expanded pearlite or a few bricks, upon request, allowing the buyer to assess bulk density, strength and chemical composition.