About Shandong Evergreen Industries, Ltd. - Plywood Supplier in China

Shandong Evergreen Industries, Ltd. is based in Shandong province, China and currently lists five active plywood products. The catalogue includes Birch plywood, generic Plywood, Film faced plywood, Okoume plywood and Teak plywood. Each entry falls under the broader plywood category, which is classified under HS chapter 44 for wood panel products. The supplier is recorded as an imported tier with a harbor trust tier, indicating its participation in cross‑border trade. The product list reflects a focus on both hardwood and soft‑wood veneer panels.

Plywood products are typically produced in sheet sizes of 1220 mm × 2440 mm (4 ft × 8 ft) and thicknesses ranging from 3 mm to 30 mm, with veneer grades such as BWR, MR, and C used for different applications. Common specifications include moisture content between 6 % and 12 % and glue types like phenol‑formaldehyde or urea‑formaldehyde, which affect formaldehyde emission classes (E0, E1). Buyers often look for certifications such as FSC, PEFC, ISO 9001, and compliance with formaldehyde emission standards. While the supplier’s own certifications are not listed, these documents are standard requirements for plywood imports.

Product Range and Specialties of Shandong Evergreen Industries, Ltd.

The supplier’s catalogue covers five plywood variants: Birch plywood, standard Plywood, Film faced plywood, Okoume plywood and Teak plywood. Birch plywood is usually supplied in BWR or MR grades for furniture panels, while Okoume veneer is favoured for lightweight marine applications and often meets MR grade. Film faced plywood incorporates a polymer film on the surface for moisture resistance, a common choice for interior wall sheathing. Teak plywood provides natural durability and is typically graded C for exterior use. All sheets are offered in the industry‑standard 1220 mm × 2440 mm dimensions and a thickness range that supports structural and decorative needs.

Trade and Export Information - Shandong Evergreen Industries, Ltd.

China ranks among the world’s largest exporters of plywood, with most shipments destined for the United States, European Union, and Southeast Asian construction markets. Export batches are normally packed on wooden pallets, wrapped in moisture‑resistant film, and loaded into 20‑ft or 40‑ft containers under FOB Shanghai or CIF destination terms. Importers generally require FSC or PEFC chain‑of‑custody certificates, ISO 9001 quality‑management documentation, and formaldehyde emission test reports that comply with CARB Phase 2 or EN 13986 standards. Chinese plywood producers also follow phytosanitary inspection procedures to meet the plant‑health regulations of the importing country.

Sourcing from Shandong Evergreen Industries, Ltd. - Buyer Guidance

When sourcing from this supplier, request a detailed product data sheet that lists veneer grade, glue type, moisture content and formaldehyde emission class. Ask for current FSC/PEFC certificates and an ISO 9001 audit report to verify quality‑management compliance. A pre‑shipment sample, accompanied by a laboratory test report for formaldehyde emissions, helps confirm that the plywood meets the buyer’s specification before full container loading.

Typical minimum orders are set at one 20‑ft container, roughly 500 m² of sheet, with a production lead time of 30‑45 days after order confirmation and receipt of a pro‑forma invoice. Verify packaging details - film wrapping, palletisation and container sealing - to ensure the product arrives in good condition. Confirm the Incoterm (FOB, CIF) and arrange for any required inspection or certification at the port of entry.

What types of plywood does Shandong Evergreen Industries, Ltd. offer?

The catalogue lists Birch plywood, standard Plywood, Film faced plywood, Okoume plywood and Teak plywood, each produced in standard sheet dimensions and a range of thicknesses suitable for furniture, construction and marine applications.

Which veneer grades are commonly used for the listed plywood products?

Birch and Okoume veneers are usually supplied in BWR or MR grades, while Teak veneer often meets a C grade for exterior use. The grade influences surface smoothness and load‑bearing capacity.

What glue systems are typical for these plywood sheets?

Chinese plywood manufacturers commonly use phenol‑formalaldehyde adhesive for exterior grade panels and urea‑formaldehyde for interior grade panels, which determine the formaldehyde emission class (E0 or E1). Buyers should request the specific glue type used for each product.

Which certifications should a buyer request when sourcing plywood from this supplier?

Buyers normally ask for a FSC or PEFC chain‑of‑custody certificate, an ISO 9001 quality‑management certificate, and a formaldehyde emission test report complying with CARB Phase 2 or EN 13986 standards.

What are the typical packaging and shipping methods for these plywood sheets?

Sheets are usually wrapped in moisture‑resistant film, stacked on pallets, and loaded in 20‑ft or 40‑ft containers. Standard Incoterms such as FOB Shanghai or CIF destination port are applied.

What is the usual minimum order quantity and lead time?

Many Chinese plywood exporters set a minimum order of one 20‑ft container, roughly 500 m² of sheet, with a production lead time of 30‑45 days after order confirmation and receipt of a pro‑forma invoice.

How can a buyer verify product quality before shipment?

Request a product data sheet, moisture‑content measurement, veneer grade certificate, glue type declaration and a recent laboratory test report for formaldehyde emissions. A pre‑shipment sample can be arranged to confirm visual and dimensional specifications.