About PT. Hou-tech Indonesia - Bathroom Accessories Supplier in Indonesia

Indonesia hosts PT. Hou-tech Indonesia, which currently lists 16 distinct products across its catalogue. The supplier’s portfolio spans the top categories of Cupboards, Doors, Gates, Grills & Windows, Bathroom Accessories, Furniture, Household Furniture, Wooden Furniture, Panels and Bedroom Furnitures, reflecting a focus on interior wood‑based fittings. Within the catalogue, bathroom vanity sets such as Westport, East Port, Davenport and Delvecchio are recorded under HS code 9403.60, the chapter for wooden furniture and related articles. Door and sliding‑door solutions, including the Amazon, Giza and Atalanta models, are classified under HS code 4418.20, which covers wooden doors, windows and their parts.

The listed products are primarily fabricated from Medium Density Fiberboard (MDF) with PVC laminate or paper overlay finishes, and Laminated Veneer Lumber (LVL) frames with honey‑comb paper cores and PVC sheet facings. Additional materials noted include mixed MDF/LVL constructions for wardrobes and engineered doors. The catalogue also mentions wall panel and adjustable shelve systems, although specific HS codes are not provided for those items. All items are described using material specifications that are common in the Indonesian wood‑product manufacturing sector.

Product Range and Specialties of PT. Hou-tech Indonesia

PT. Hou-tech Indonesia’s catalogue contains several bathroom vanity sets (Westport, East Port, Davenport, Delvecchio, Maracana, Copacabana, Terra, Fountaine) that are fabricated from MDF with PVC laminate or sheet finishes. In the broader industry, MDF panels for vanities are typically produced to a density of 600‑800 kg/m³, moisture content between 8‑12 %, and surface hardness measured by the Janka test at 1.5‑2.0 MPa. Buyers often request E‑class formaldehyde emission levels (≤0.124 mg/L) for indoor furniture. Sliding and swing doors listed (Amazon, Giza, Atalanta, generic Sliding Doors, Folding Doors, Wood Engineered Doors) use LVL frames; LVL in the market is usually graded to a minimum tensile strength of 30 MPa and a modulus of elasticity around 10 GPa. PVC sheet cladding is commonly supplied in thicknesses of 0.5‑1.2 mm and with a fire‑retardant rating of B‑s2, d0. The HS code 4418.20 family captures wooden doors, windows and their components, while 9403.60 covers wooden furniture, including bathroom units and wardrobes.

Trade and Export Information - PT. Hou-tech Indonesia

Indonesia is a major exporter of engineered wood furniture and door systems, with the majority of shipments destined for the European Union, United States, Middle East and Southeast Asian markets. HS chapter 94 (furniture) and chapter 44 (wooden doors and windows) are routinely inspected under the ASEAN - EU Free Trade Agreement and US customs regulations, which often require material safety data sheets, phytosanitary certificates and, where applicable, FSC or PEFC chain‑of‑custody documentation. Typical export logistics involve 40‑foot containers loaded on pallets with edge‑protectors; door panels are frequently packed in wooden crates to prevent warping during sea transit. Buyers usually request compliance with ISO 9001 quality management, CE marking for interior fittings sold in the EU, and fire‑safety standards such as EN 13501‑1 for PVC‑faced panels. Indonesian manufacturers also adhere to the national standard SNI for formaldehyde emissions, which aligns with the CARB Phase II limits for exported products.

Sourcing from PT. Hou-tech Indonesia - Buyer Guidance

When sourcing bathroom vanities or engineered doors from PT. Hou-tech Indonesia, buyers should request product data sheets that detail MDF density, moisture content, formaldehyde emission class (E‑0/E‑1) and PVC sheet fire‑rating. Sample verification should include dimensional tolerances (±2 mm for door panels, ±5 mm for vanity width) and surface finish inspection for uniformity of laminate or paper overlay. For LVL‑based doors, confirm tensile strength, core thickness and the presence of any anti‑warping treatments; a certified test report (ASTM D1037 or equivalent) is standard. Request FSC or PEFC chain‑of‑custody certificates if sustainable sourcing is required, and verify that the supplier can provide CE‑type examination certificates for EU‑bound interior fittings. Prior to order confirmation, ensure that the HS codes cited (9403.60 for vanities, 4418.20 for doors) match the intended customs classification to avoid tariff discrepancies.

What types of bathroom vanity sets does PT. Hou-tech Indonesia offer?

The supplier lists eight vanity models, including Westport, East Port, Davenport, Delvecchio, Maracana, Copacabana, Terra and Fountaine, all classified under HS code 9403.60 and built from MDF with PVC laminate, Olevin or paper overlay finishes.

Are the door products made from solid wood or engineered materials?

All listed door products use engineered wood - specifically Laminated Veneer Lumber (LVL) frames combined with honey‑comb paper cores and PVC sheet facings, and are recorded under HS code 4418.20.

Which certifications should a buyer verify for these wood products?

Buyers should ask for FSC or PEFC chain‑of‑custody certificates, ISO 9001 quality management, and material safety data sheets that confirm formaldehyde emission classes and fire‑rating of PVC facings.

What typical packaging is used for shipping the vanities and doors?

Vanities are usually crated in reinforced wooden boxes with foam inserts; engineered doors are commonly packed on pallets with edge protectors and may be wrapped in stretch film or placed in wooden crates for 40‑foot container loading.

What are the common HS codes for the supplier’s product categories?

Bathroom vanity sets fall under HS 9403.60 (furniture of wood), while swing, sliding and folding doors are classified under HS 4418.20 (wooden doors, windows and their parts).

What documentation is needed to clear customs in the EU for these items?

Typical documents include a commercial invoice, packing list, certificate of origin, FSC/PEFC certificate if applicable, CE conformity declaration for interior fittings, and test reports for formaldehyde emissions and fire safety.

Is there a standard lead time for producing the listed door and vanity items?

While the supplier’s specific lead times are not disclosed, industry practice for MDF vanities and LVL doors in Indonesia ranges from 30 to 45 days from order confirmation, depending on order volume and finish specifications.

Can samples be requested before a full order?

Yes, buyers can request a sample of any listed vanity or door model; samples are typically shipped in a small protective crate and may be subject to a nominal sample fee.