About Nilkamal Ltd - Furniture Supplier in India

Nilkamal Ltd is based in India and currently lists five distinct furniture products in its catalogue. The active product count of five includes Planter, Stool, Trolley, Dining Table and Center Table. Each item falls under the general furniture category and is intended for both residential and commercial use. The supplier is identified as an imported tier with a harbor trust tier in the B2B platform. No additional product details such as material composition are provided in the catalogue.

The catalogue entries use generic product names without specifying dimensions, materials or finishes. Planters are typically offered in plastic or metal forms, while stools may be metal or wood framed. Trolleys are usually designed for material handling with load capacities ranging from 100 to 250 kg. Dining tables and center tables are core interior furniture pieces, often supplied in solid wood, engineered wood or metal frames. The lack of HS codes in the supplied data means no specific customs classification is attached to each item.

Product Range and Specialties of Nilkamal Ltd

Within the five listed items, standard industry grades apply: plastic planters are often produced in high‑density polyethylene (HDPE) meeting ASTM D‑6100, and metal planters are usually steel or aluminum with corrosion‑resistant coatings. Stools commonly conform to EN 16139 for seat height (typically 45 cm) and load bearing (up to 150 kg). Trolleys are classified as material‑handling equipment and are frequently rated for a maximum load of 200 kg, with wheel specifications such as 80 mm diameter polyurethane. Dining tables and center tables are categorized under furniture sub‑heading 9403, with common dimensions of 1200 - 2000 mm length for dining tables and 800 - 1200 mm length for center tables, and surface finishes ranging from natural wood to melamine veneer. Buyers usually request material safety data sheets (MSDS) for plastics and finish certifications for wood to verify compliance with VOC limits.

Trade and Export Information - Nilkamal Ltd

India is a major exporter of finished furniture, and items similar to those listed by Nilkamal Ltd are typically shipped to North America, Western Europe and the Middle East under HS Chapter 94. Export shipments often use 40‑foot containers, with a capacity of roughly 20 - 25 dining tables or an equivalent volume of smaller items. Importing countries commonly require certifications such as ISO 9001 quality management, FSC chain‑of‑custody for wood, and BSCI compliance for social standards. Packaging standards include double‑wall cardboard boxes for tables, protective foam for glass tops, and palletized loads for trolleys, all sealed for phytosanitary inspection where applicable. Standard Incoterms used in Indian furniture trade are FOB Mumbai or CIF destination port, depending on buyer preference.

Sourcing from Nilkamal Ltd - Buyer Guidance

Prospective buyers should request detailed product specifications, including material type, load‑bearing capacity and finish grade, before placing an order. Sample units or 3‑D drawings are useful to verify dimensions and aesthetic fit, especially for dining and center tables. Test reports such as ASTM D‑3220 for plastic durability or EN 16139 for stool safety should be asked for as part of the due‑diligence process. Typical minimum order quantities range from 50 units for tables to 100 units for smaller accessories, with lead times of 30 - 45 days after order confirmation. Verification of certifications (ISO 9001, FSC, BSCI) and a review of packaging plans will help mitigate customs delays and ensure compliance with destination market regulations.

What materials are used for the planters listed by Nilkamal Ltd?

The catalogue does not specify material, but planters from Indian suppliers are commonly manufactured in high‑density polyethylene, polypropylene or coated steel, each meeting relevant ASTM or ISO material standards.

Are there standard dimensions for the stools offered?

Stools in this segment usually have a seat height of 45 cm, a seat width of 30 - 35 cm, and a load‑bearing capacity up to 150 kg, complying with EN 16139 safety requirements.

What load capacity can be expected from the trolleys?

Trolleys are typically rated for a maximum payload between 100 kg and 250 kg, with wheel specifications such as 80 mm polyurethane wheels to ensure smooth operation.

Which certifications should a buyer request for the dining and center tables?

Buyers should request ISO 9001 quality management certificates, FSC chain‑of‑custody documentation for wood products, and any applicable CE marking if the tables are destined for the EU market.

What are the usual packaging methods for these furniture items?

Tables and center tables are generally packed in double‑wall cardboard boxes with edge protectors, stools and planters in individual corrugated cartons, and trolleys are palletized with shrink‑wrap for stability during container loading.

What are typical shipping terms and container loading estimates?

Exporters from India frequently use FOB Mumbai or CIF destination ports; a 40‑foot container can accommodate approximately 20 - 25 dining tables or an equivalent volume of stools, planters and trolleys, depending on packaging density.