About JSL Industry Co., Ltd - Mold Supplier in China

China hosts JSL Industry Co., Ltd, which lists five active products in its catalogue. The company focuses on manufacturing moulds used in the production of various metal and plastic items. Products include a table mould, a crate box mould, wastebin and dustbin moulds, and a press die. These moulds are typically classified under HS chapter 84, which covers machinery and equipment for the metal‑working and plastics industries. The catalogue does not specify material grades or certifications held by the supplier.

The table mould is designed for shaping flat surfaces used in furniture or industrial work‑benches. Crate box moulds are employed to form reusable containers for logistics and storage. Wastebin and dustbin moulds serve municipal and commercial waste‑management applications. Press dies are used in stamping operations for metal parts and are commonly fabricated from tool steels such as P20 or H13. Buyers should verify the material specifications and dimensional tolerances before placing orders.

Product Range and Specialties of JSL Industry Co., Ltd

The five moulds listed are produced in standard sizes that fit into 20‑ft or 40‑ft containers, with typical unit weights ranging from 150 kg for a crate box mould to 350 kg for a press die. In the mould industry, China manufacturers often use P20 steel for plastic injection moulds and H13 steel for high‑temperature press dies, providing hardness levels between 30 HRC and 45 HRC. Buyers usually request material certification that confirms compliance with ASTM A681 or EN 10084 standards.

Table and wastebin moulds are frequently offered with cavity depths of 100 mm to 250 mm and surface finishes of Ra 0.8 µm to Ra 1.6 µm, which affect product surface quality. Crate box moulds may incorporate interchangeable inserts to accommodate different crate dimensions, a common practice to reduce tooling changeover time. Standard packaging includes wooden crates with moisture‑resistant liners, and the moulds are typically shipped under FOB Shanghai or Ningbo terms.

Trade and Export Information - JSL Industry Co., Ltd

China is a major exporter of industrial moulds, and shipments are commonly directed to Southeast Asian manufacturers, European automotive suppliers, and North American consumer‑goods producers. The HS code 8465 covers moulds for plastics, while HS code 8466 includes other moulds such as press dies, both subject to inspection under the Chinese customs export control system. Export documentation usually requires a commercial invoice, packing list, and a declaration of conformity to the destination country's safety standards.

Buyers often request certificates such as ISO 9001 for quality management and ISO 14001 for environmental management, though these are not listed for this supplier. Compliance with the EU REACH regulation or US TSCA may be required for moulds that come into contact with food‑grade plastics, so verification of material safety data sheets is advisable. Typical incoterms used for mould shipments from China are FOB, CIF and DDP, with containers loaded on roll‑on/roll‑off vessels for efficient handling.

Sourcing from JSL Industry Co., Ltd - Buyer Guidance

Prospective buyers should obtain a detailed technical drawing that specifies cavity dimensions, venting layout, and cooling channel configuration before confirming an order. Requesting a material test report that shows chemical composition and hardness of the steel grade helps ensure the mould meets the intended production cycle. It is also prudent to ask for a sample of the finished mould or a prototype run to evaluate fit‑and‑finish and to validate the supplier’s machining tolerance capabilities.

What product types does JSL Industry Co., Ltd offer?

The catalogue lists five mould types: a table mould, a crate box mould, wastebin mould, dustbin mould and a press die.

Under which HS codes are these moulds classified for export?

Table, wastebin, dustbin and crate box moulds fall under HS code 8465 (moulds for plastics), while press dies are classified under HS code 8466 (other moulds).

What material specifications are typical for these moulds?

Manufacturers in China commonly use P20 tool steel for plastic moulds and H13 steel for press dies, with hardness levels between 30 HRC and 45 HRC and compliance to ASTM A681 or EN 10084.

Which certifications should a buyer request from this supplier?

Buyers should request the supplier’s ISO 9001 quality management certificate, material test reports, and any relevant REACH or TSCA compliance documentation.

What are the usual packaging and shipping methods for these moulds?

Moulds are typically packed in wooden crates with moisture‑resistant liners, loaded into 20‑ft or 40‑ft containers, and shipped under FOB, CIF or DDP incoterms from major Chinese ports such as Shanghai or Ningbo.

What lead times and minimum order quantities are common for mould orders from China?

Lead times range from four to eight weeks depending on the mould size and complexity, and suppliers often set a minimum order of one complete mould, which aligns with the single‑unit nature of the products listed.