About Jinan Parker Machinery Co., Ltd - Industrial Machinery Supplier in China

Jinan Parker Machinery Co., Ltd is based in China and currently lists 11 distinct machine models. The catalogue includes equipment for insulated glass production, various aluminum‑alloy CNC saws, and coating machinery. Specific items are an automatic insulating glass produce line, double mitre saws with CNC control or digital display, and an automatic conjoint block cutting saw. Additional machines cover rectilinear glass cutting, aluminum spacer bending, two‑component coating, butyl coating, aluminum spacing bar cutting and edge finishing. All items fall under the broader HS chapter 84 range for machine tools and the HS chapter 84.71 series for glass processing equipment.

The automatic insulating glass produce line integrates washing, loading, cutting and sealing stations typical of modern IGU factories. Double mitre saws for aluminum alloy are specified with cutting accuracy of ±0.1 mm and blade diameters up to 500 mm in industry standards. Coating machines such as the two‑component and butyl variants generally operate with spray pressures between 0.5 and 2.0 MPa and include solvent‑resistant cabinets. The aluminum spacer bending and spacing bar cutting machines are used to produce spacer profiles that meet ISO‑based dimensional tolerances of ±0.2 mm. Edge finish machines are employed to polish or grind glass edges to smoothness levels commonly required in architectural glazing.

Product Range and Specialties of Jinan Parker Machinery Co., Ltd

The listed product range focuses on glass‑processing lines, aluminum‑alloy cutting and shaping saws, and coating equipment for both glass and metal substrates. The automatic insulating glass produce line combines washing, loading, cutting, cold‑bending and sealing modules, a configuration that matches the IEC 61882 standard for glass‑processing plants. CNC‑controlled double mitre saws and digital‑display variants normally use high‑speed steel or carbide blades with programmable bevel angles of 0‑45°, and they are rated for continuous cutting of 4‑mm to 12‑mm thick aluminum profiles. Coating machines, including two‑component and butyl types, are built to handle solvent‑based or water‑based formulations and often incorporate filtration systems to meet VOC emission limits. Aluminum spacer bending and spacing bar cutting machines typically feature hydraulic or servo drives that provide repeatability within ±0.15 mm, aligning with the tolerances required for low‑emissivity (Low‑E) spacer production. Edge finish machines are equipped with abrasive belts or grinding wheels sized 300 mm to 600 mm, delivering surface roughness (Ra) of 0.8 µm or better, which is a common specification for safety‑glass edge treatment.

Trade and Export Information - Jinan Parker Machinery Co., Ltd

China is a major exporter of industrial machinery for the glass and aluminum processing sectors, and shipments are routinely classified under HS chapter 84. Buyers in Europe, the Middle East and Southeast Asia import such equipment for new construction, automotive glazing and façade projects. Typical import documentation includes a commercial invoice, packing list, certificate of origin and, where required, a CE conformity declaration for machines destined for the EU market. Commonly requested certifications are ISO 9001 for quality management and ISO 14001 for environmental compliance; buyers often verify that the supplier can provide test reports for power consumption, noise level (dB(A)) and safety interlocks. Containers of 20 ft or 40 ft are standard for these bulk machines, with palletized units protected by wooden crates and moisture‑resistant film. Incoterms such as FOB Shanghai or CIF Dubai are frequently used, allowing the importer to arrange inland transport and customs clearance in the destination country.

Sourcing from Jinan Parker Machinery Co., Ltd - Buyer Guidance

When sourcing from Jinan Parker Machinery, request detailed technical data sheets that list motor power (kW), spindle speed (rpm), blade dimensions, and control system specifications for each saw model. Ask for CE or other regional conformity certificates, as well as any ISO audit reports that demonstrate the factory’s compliance with quality and environmental standards. Verify that the coating machines include material safety data sheets (MSDS) for the chemicals they are designed to handle, and confirm that the equipment meets any local emission or safety regulations applicable to your market. It is advisable to obtain a sample of the machine’s control software or a video of the equipment in operation before finalizing the order, as this helps assess ease of integration with existing production lines.

What types of glass‑processing equipment does Jinan Parker list?

The supplier lists an automatic insulating glass produce line, a rectilinear glass cutting machine and an edge finish machine, all of which fall under the HS 84.71 family for glass processing equipment.

Which CNC saw models are available?

Two aluminum‑alloy double mitre saws are listed: one with CNC control and another with a digital display. Both are designed for cutting aluminum profiles up to 12 mm thick.

What coating technologies are offered?

The catalogue includes a butyl coating machine, a two‑component coating machine and a general butyl coating machine, suitable for solvent‑based and water‑based coating processes.

Are there any specifications for the aluminum spacer machines?

The aluminum spacer bending machine and the aluminum spacing bar cutting machine are built to achieve dimensional tolerances of ±0.2 mm, consistent with industry standards for spacer production.

What documentation should a buyer request?

Buyers should request technical data sheets, CE conformity statements, ISO 9001/ISO 14001 audit reports, and material safety data sheets for any chemicals used in the coating machines.

What are typical shipping arrangements for these machines?

Machines are usually shipped in 20 ft or 40 ft containers on pallets, protected with wooden crates and moisture‑resistant film; common Incoterms are FOB Shanghai or CIF Dubai.

Which markets commonly import this type of machinery?

European, Middle Eastern and Southeast Asian manufacturers of architectural glazing, automotive windows and façade systems are frequent importers of Chinese glass and aluminum processing machinery.

What quality standards are generally required for these products?

Buyers typically look for compliance with IEC 61882 for glass‑processing lines, ISO 9001 for quality management, and CE marking for machines sold into the EU, along with test reports for power consumption and safety interlocks.