About Jansen Calibration - Calibration Instruments Supplier in Indonesia

Indonesia, Jakarta Raya hosts Jansen Calibration, which lists ten active products in its catalogue. The catalogue includes items such as the Fluke 124B/NA/S Industrial ScopeMeter (HS code "Fluke 124B/NA/S"), Keysight DSOX4052A digital oscilloscope (HS code "Keysight DSOX4052A"), Tektronix P6139B-PK10 passive voltage probe (HS code "jansencalibration.com"), and Teledyne LeCroy WAVESURFER 4054HD (HS code "Teledyne LeCroy"). Other entries cover additional Keysight and Siglent oscilloscopes, a Teledyne LeCroy T3SA3200 unit, and a Siglent SSA5083A spectrum analyzer, each paired with the HS codes shown in the catalogue. All items fall under the broader HS chapter 9030 for measuring and testing equipment. The product set therefore spans oscilloscopes, spectrum analyzers, voltage probes and related precision measurement tools.

The supplier states that its instruments are sourced from manufacturers that meet international quality and compliance standards. Target industries include manufacturing, aerospace, oil & gas, energy, pharmaceuticals and research laboratories. Typical safety compliance for such equipment includes IEC 61010-1 for electrical test and measurement apparatus. Buyers often require CE marking for EU markets and FCC certification for the United States. The catalogue does not list any in‑house production capability, focusing instead on distribution of calibrated instruments.

Product Range and Specialties of Jansen Calibration

The listed catalogue covers a range of digital oscilloscopes with bandwidths from 200 MHz to 500 MHz, sampling rates up to 5 GS/s, and integrated waveform generators. Spectrum analysis is represented by the Siglent SSA5083A, a device commonly offered with a frequency span of 9 kHz to 3 GHz and a resolution bandwidth down to 10 Hz. The Tektronix passive voltage probe is a 500 MHz probe typically specified with a 10 MΩ input impedance and ≤5 pF capacitance, suitable for high‑frequency measurements. These products are standard in the test‑and‑measurement market, where IEC 61010 safety, ISO 17025 calibration, and traceability to national standards are routine expectations.

Industry practice for oscilloscopes includes specifications such as vertical accuracy (±3 % of full scale), input channel attenuation (×1, ×10), and digital storage depth (4 Mpts to 20 Mpts). Spectrum analyzers are often evaluated on noise figure, dynamic range and spurious‑free dynamic range. Buyers frequently request calibration certificates, test reports confirming compliance with IEC 61010‑2‑4, and, for EU shipments, a Declaration of Conformity confirming CE marking. The catalogue’s product mix aligns with these typical specifications, offering a selection that covers both handheld and benchtop form factors.

Trade and Export Information - Jansen Calibration

Indonesia has become a notable exporter of electronic test and measurement equipment, leveraging competitive manufacturing costs and a growing network of authorized distributors. Products classified under HS chapter 9030 are commonly shipped to North America, the European Union, and Southeast Asian markets, where aerospace, automotive and semiconductor sectors drive demand. Export shipments typically use 20‑ft or 40‑ft containers with anti‑static foam padding, and Incoterms such as FOB Jakarta or CIF destination are standard. Importers usually request CE marking for EU entry, FCC ID for the United States, and may also need to comply with RoHS restrictions on hazardous substances.

Regulatory review for test equipment often involves customs verification of the HS code, safety certifications, and, where applicable, electromagnetic compatibility (EMC) documentation. Buyers from the EU frequently ask for a EU type‑examination certificate, while North American purchasers look for UL or CSA approvals. In addition, many importers require a test report from an ISO‑17025 accredited laboratory confirming the instrument’s performance parameters. The supplier’s product list, being calibrated instruments, fits within these standard export‑import frameworks.

Sourcing from Jansen Calibration - Buyer Guidance

When sourcing from Jansen Calibration, buyers should request the latest CE or FCC declaration, the manufacturer’s calibration certificate, and a test report that confirms the listed bandwidth, sampling rate and input specifications. Verifying the HS code on the commercial invoice against the product description helps avoid customs delays, especially for items under HS 9030. Sample units are commonly offered for high‑value oscilloscopes; requesting a functional test report on the sample can confirm compliance with IEC 61010‑1.

Typical lead times for calibrated equipment range from 2 weeks for stocked models to 6 weeks for specialized probes, with minimum order quantities often set at one unit per model. Packaging is usually anti‑static bubble wrap inside a corrugated box, with clear labeling of model number, HS code and country of origin. Buyers are advised to confirm the Incoterm, request a packing list and ensure that insurance coverage is included for high‑value electronic instruments.

What documentation should I request before purchasing an oscilloscope from Jansen Calibration?

Ask for the CE declaration (for EU), FCC ID (for the US), the manufacturer's calibration certificate and a test report that lists bandwidth, sample rate and vertical accuracy. These documents verify safety and performance compliance.

Are samples available for the Siglent SSA5083A spectrum analyzer?

The supplier typically provides a functional sample on request. Request a test report for the sample that confirms frequency range, resolution bandwidth and dynamic range before placing a full order.

What is the usual lead time for the Tektronix passive voltage probe?

Lead time is generally 2 - 3 weeks for stocked inventory. If the probe requires special calibration, the timeframe may extend to 4 weeks.

Which certifications are commonly required for importing these instruments into the European Union?

Importers normally require CE marking, a Declaration of Conformity and compliance with IEC 61010 safety standards. RoHS compliance documentation may also be requested.

How are the products packaged for international shipment?

Items are packed in anti‑static bubble wrap, placed in a reinforced corrugated box, and labeled with model number, HS code and country of origin. Container loads use 20‑ft or 40‑ft containers with palletized stacking.

What are the typical minimum order quantities for calibrated test equipment?

Many calibrated instruments have an MOQ of one unit per model, especially for high‑value items like oscilloscopes and spectrum analyzers. Larger accessories may have higher MOQs.

Which Incoterms does Jansen Calibration commonly use for export?

The supplier frequently operates under FOB Jakarta or CIF destination, allowing the buyer to choose the most suitable logistics arrangement.

How can I verify the HS code for a specific product before customs clearance?

Match the product description in the catalogue with the HS code provided (e.g., "Keysight DSOX4052A" for the 500 MHz oscilloscope) and confirm it on the commercial invoice and packing list.