About Hefei Bajin Trading Co., Ltd - ESD and anti-static products Supplier in China

Hefei Bajin Trading Co., Ltd is based in China and lists six active products. The catalogue includes an ESD rubber mat, a polyimide adhesive (Kapton) tape, a fuel‑saving device labelled BJ fuel saver, an ESD wrist strap, an anti‑static heel grounder, and an ESD TC 5 mm grid coat. All items belong to the electrostatic discharge (ESD) and anti‑static product family used in electronics assembly and handling. The supplier’s listings fall under plastic and adhesive HS chapters, commonly HS 39 for polymer articles and HS 38 for adhesives. No additional product categories are indicated in the provided data.

Product Range and Specialties of Hefei Bajin Trading Co., Ltd

The supplier offers six items that address static control and related applications. The ESD rubber mat and the 5 mm grid coat are typically made from conductive silicone or thermoplastic elastomer sheets with surface resistivity between 10⁶ and 10⁹ Ω·sq. Polyimide adhesive tape is supplied in widths ranging from 12 mm to 100 mm and thicknesses of 0.025 mm to 0.1 mm, meeting IEC 61340‑5‑1 dielectric strength requirements of at least 2 kV. The ESD wrist strap and anti‑static heel grounder are usually constructed from conductive fabric or metal‑filled polymer and exhibit a resistance of 1 kΩ to 10 kΩ when measured to ground. The BJ fuel saver is a plastic component marketed for fuel‑efficiency improvement and does not fall under standard ESD classifications. Buyers should verify material safety data sheets and any RoHS or REACH compliance for the plastic parts.

Trade and Export Information - Hefei Bajin Trading Co., Ltd

China is a major exporter of ESD and anti‑static products, with shipments commonly directed to electronics manufacturing hubs in Southeast Asia, Europe and North America. Customs classifications typically use HS chapter 39 for the polymer‑based mats, tapes and coatings and HS chapter 38 for adhesive products, and importers often require CE marking, RoHS compliance and third‑party test reports for surface resistivity and dielectric strength.

Sourcing from Hefei Bajin Trading Co., Ltd - Buyer Guidance

When sourcing, request product data sheets that list surface resistivity, thickness, dielectric strength and compliance with IEC 61340‑5‑1. Ask for independent test reports (e.g., SGS, Intertek) that confirm the stated electrical parameters and for material safety data sheets for any polymer components.

What ESD products are listed by Hefei Bajin Trading Co., Ltd?

The catalogue includes an ESD rubber mat, polyimide (Kapton) adhesive tape, a BJ fuel saver device, an ESD wrist strap, an anti‑static heel grounder, and an ESD TC 5 mm grid coat.

Which standards should buyers check for the ESD rubber mat and grid coat?

Buyers should look for compliance with IEC 61340‑5‑1 (ESD control) and verify surface resistivity in the 10⁶‑10⁹ Ω·sq range, typically documented in IEC‑tested reports.

What are typical specifications for polyimide adhesive tape?

Typical tape is 12‑100 mm wide, 0.025‑0.1 mm thick, with a dielectric strength of at least 2 kV and a temperature rating up to 260 °C, often meeting UL 94 V‑0 flame rating.

Which certifications are commonly required for ESD products from China?

Importers usually request CE marking, RoHS compliance and independent test reports for surface resistivity and dielectric strength; these should be confirmed with the supplier before shipment.

What documentation is advisable before placing an order?

Request a material safety data sheet (MSDS), a product data sheet detailing electrical parameters, and a third‑party inspection or test certificate that references the relevant IEC standards.

What are typical minimum order quantities and lead times?

Minimum order quantities often start at 500 units for mats or 1 000 m for tape, with lead times of 15‑30 days after order confirmation, depending on volume and product type.

How are these items usually packaged for export?

Items are packed in moisture‑resistant poly bags or cardboard cartons, loaded into 20‑ft or 40‑ft containers, and labeled according to HS chapter 39 conventions with the country of origin indicated.