About Getwick Limited - Titanium Supplier in China

Getwick Limited is based in China and currently lists five distinct titanium products in its catalogue. The active product count of five includes titanium plates, rods, pipes, wire and bolts. These items are grouped under the primary categories of titanium plate, titanium rod and titanium wire as indicated in the supplier profile. Each product is identified by its generic material type rather than a specific alloy grade in the public listing. The catalogue does not provide HS codes, so classification must be inferred from standard tariff headings for titanium products.

The titanium plates are presented without dimension details, but typical commercial plates range from 2 mm to 30 mm thickness and are supplied in sheet or cut formats. Titanium rods generally cover diameters from 6 mm up to 200 mm and are used in structural and machining applications. Pipes are commonly offered in diameters from 20 mm to 600 mm with wall thicknesss following standard schedules. Wire products usually span diameters of 0.2 mm to 5 mm and are supplied on spools. Bolts are manufactured to standard metric thread sizes and are often classified under the same HS heading as other titanium forgings.

Product Range and Specialties of Getwick Limited

The catalogue lists titanium plates, rods, pipes, wire and bolts, all of which are standard forms of commercially produced titanium alloy. In global trade, plates and sheets are frequently supplied in ASTM B265 Grade 2 (commercially pure Ti) or Grade 5 (Ti‑6Al‑4V) with surface finishes such as mill‑finished or polished. Rods and bars are commonly offered in ASTM B348 grades, with tolerance of ±0.2 mm for diameter and straightness within 0.1 % of length. Wire is typically produced to ASTM B227 specifications, with tensile strength around 480 MPa for Grade 2 and 900 MPa for Grade 5.

Bolts and fasteners are usually machined to ISO 4762 metric head dimensions and may be supplied in the same alloy grades as the raw material. Standard packaging includes wooden crates or steel pallets with protective film to prevent surface damage. Product identification often includes heat numbers or batch codes linked to mill test reports.

Trade and Export Information - Getwick Limited

Exports of titanium plate, rod and wire from China are generally classified under HS chapter 81, subheading 8102 for unwrought titanium products. Major import regions include North America, Europe and Southeast Asia, where aerospace, automotive and medical device manufacturers source these alloys. Buyers typically require certifications such as ISO 9001 quality management and mill test reports confirming chemical composition and mechanical properties. Shipping is commonly arranged on 20‑ft or 40‑ft containers, with plates occupying up to 22 tons per container depending on thickness, while wire is packed in wooden boxes of 500 kg each. Incoterms most frequently used are FOB Shanghai or CIF destination port, reflecting standard logistics practices for bulk metal shipments.

Customs authorities often request the commercial invoice to include the HS code, country of origin and a statement of compliance with the relevant ASTM or EN standards. For aerospace applications, additional traceability through NADCAP accreditation may be requested by the end user. Export documentation from China usually includes a certificate of origin and, where required, an inspection certificate from a recognized third‑party agency.

Sourcing from Getwick Limited - Buyer Guidance

Potential buyers should request a mill test report for each titanium grade to verify carbon, iron and alloying element limits defined by ASTM standards. Samples of plates, rods or wire can be supplied in cut lengths of 100 mm for dimensional verification and surface inspection. Prior to confirming a purchase order, verify the supplier’s ability to provide ISO 9001 certification or equivalent quality system documentation. Lead times for forged titanium items such as bolts are typically 4 - 6 weeks, while rolled products like plates and wire may be delivered within 2 - 3 weeks after order confirmation.

Minimum order quantities vary by product form; standard practice is 1 ton for plates, 500 kg for rods and 200 kg for wire, but exact figures should be negotiated. Packaging should include corrosion‑inhibiting film and sturdy pallets to withstand handling during ocean freight. Buyers are advised to specify the desired Incoterm and arrange for independent inspection if traceability is critical.

What titanium grades are available from Getwick Limited?

The catalogue does not list specific grades, but typical grades for Chinese exporters include ASTM B265 Grade 2 and Grade 5 for plates and sheets, and ASTM B348 for rods and bars. Buyers should request the exact grade in the mill test report.

How can I obtain a sample of the titanium wire?

Samples are usually supplied as 100 mm lengths wound on a small spool, packaged in a protective bag. Request the sample together with the corresponding mill test report.

Which HS code should be used for customs clearance of the titanium plates?

Titanium plates, rods and wire are commonly classified under HS code 8102.10 for unwrought titanium, not alloyed with other metals. Confirm the exact sub‑heading with the freight forwarder.

What certifications are typically required for titanium products used in aerospace?

Buyers often require ISO 9001 quality management certification and a mill test report complying with ASTM B265 or B348. For aerospace, NADCAP accreditation or a declaration of conformity to EN 10204 3.1 may be requested.

What are the typical packaging and shipping methods?

Plates and rods are loaded on wooden crates or steel pallets with anti‑corrosion film; wire is packed in wooden boxes of up to 500 kg. Shipments are usually sent in 20‑ft or 40‑ft containers under FOB Shanghai or CIF destination port.

What is a common minimum order quantity for titanium bolts?

Standard minimum order quantities for forged titanium bolts range from 200 kg to 500 kg, depending on size and thread type.

How long does it take to produce and ship titanium pipes?

Production lead time for standard diameter pipes is typically 4 - 5 weeks, followed by 2 - 3 weeks of transit time in a 40‑ft container.