About GEO-Technik GmbH & Co. KG - Street Lighting Supplier in Germany

Germany hosts GEO-Technik GmbH & Co. KG, which currently lists five active lighting products. The catalogue includes a 35 W high‑pressure sodium (SOX) street lamp, a compact solar street light available in 18 W and 75 W LED versions, a portable LED work light operating on 12 V‑24 V, a 35 W SOX sodium lamp model BY22d, and a 24 V electronic ballast designed for 35 W LPS lamps. Each entry falls under standard lighting HS‑code families such as 9405 (lamps and light fittings) and 8539 (LED lamps) that are recognised in international trade. The supplier’s product set therefore covers both conventional sodium lighting and modern LED solutions for outdoor and mobile applications. The list reflects a focus on street and work‑site illumination rather than indoor residential lighting.

Product Range and Specialties of GEO-Technik GmbH & Co. KG

The 35 W SOX street lamp is a low‑pressure sodium unit commonly rated at roughly 4 000 lumens with a colour temperature near 2 100 K, and it typically complies with IEC 60598‑2‑33 for safety. Solar street lights in the 18 W and 75 W LED variants usually incorporate a photovoltaic panel of 15 W‑40 W, a lithium‑ion battery delivering 12‑48 V, and an IP65‑rated housing, delivering lumen outputs between 1 500 lm and 6 000 lm respectively. The mobile LED work light operates on 12 V‑24 V DC, often providing 100 W to 200 W of output with an impact‑resistant, IP66 enclosure suitable for construction sites. The electronic ballast listed for 24 V input is intended to drive 35 W LPS lamps, offering a power factor above 0.95 and compliance with IEC 61800‑9‑2 for electronic ballasts. Industry practice also distinguishes these products by energy‑efficiency classes (e.g., EU Energy Label A for LED modules) and by standards such as EN 12464 for outdoor lighting performance.

Trade and Export Information - GEO-Technik GmbH & Co. KG

German lighting manufacturers commonly export to the EU, Middle East, Africa and parts of Asia, where municipal street‑lighting upgrades drive demand for both sodium and LED technology. HS‑code 9405 30 covers lamps, while HS‑code 8539 90 is used for LED lamp assemblies; both categories are subject to CE marking and RoHS compliance for the European market. Buyers typically request test reports confirming luminous flux, colour rendering index (CRI), power factor, and IP rating, and they verify that the product meets IEC 60598 safety standards. Export shipments are frequently packed in wooden crates or reinforced cardboard, with 20‑ft containers holding approximately 150‑200 street‑lamp units depending on packaging. Common Incoterms include FOB Hamburg or CIF destination ports, and German exporters often provide pre‑cleared customs documentation for HS‑code classification and origin proof.

Sourcing from GEO-Technik GmbH & Co. KG - Buyer Guidance

When sourcing from GEO-Technik, buyers should request a Declaration of Conformity (DoC) confirming CE and RoHS compliance, as well as IEC test certificates for luminous flux and electrical safety. For the solar street lights, verify the photovoltaic panel rating, battery capacity (Ah), and the IP65 enclosure rating before confirming order quantities. The electronic ballast must be matched to the specific 35 W LPS lamp model, so request the ballast’s efficiency curve and load‑range specifications. Samples of the LED work light are useful to assess beam spread, colour temperature, and durability under impact tests. Confirm packaging dimensions, weight per unit, and preferred Incoterm to align logistics with container loading plans.

What are the typical technical specifications for the 35 W SOX street lamp?

The 35 W low‑pressure sodium lamp usually delivers about 4 000 lumens, operates at a colour temperature of roughly 2 100 K, and complies with IEC 60598‑2‑33 safety standards. It is classified under HS code 9405 30 for lamps.

Which certifications should be verified for the solar street lights?

Buyers should ask for CE marking, RoHS compliance, and IEC 60598‑2‑1 safety test reports. Energy‑efficiency class A is common for LED modules in this segment.

What voltage range does the mobile LED work light support?

The DOX Mobile LED Work Light is rated for 12 V to 24 V DC input and typically provides 100 W‑200 W of LED output with an IP66 impact‑resistant housing.

How is the electronic ballast compatible with the listed lamps?

The 24 V electronic ballast is designed for 35 W LPS SOX lamps, offering a power factor above 0.95 and meeting IEC 61800‑9‑2 ballast standards. Compatibility is confirmed by matching the ballast’s output voltage to the lamp’s requirements.

What HS codes apply to these lighting products?

Standard HS classifications are 9405 30 for lamps and light fittings, and 8539 90 for LED lamp assemblies. The electronic ballast falls under HS code 8531 90 for electrical apparatus.

What are the typical packaging and shipping methods for these items?

Products are usually packed in reinforced cardboard boxes or wooden crates, with a 20‑ft container holding roughly 150‑200 units depending on unit dimensions. Common Incoterms are FOB Hamburg or CIF to the buyer’s destination port.

What documentation is essential before placing an order?

Essential documents include the CE Declaration of Conformity, RoHS test report, IEC safety certificates, product data sheets showing luminous flux, IP rating, and a detailed packing list. Requesting a sample for performance verification is also advisable.