About Dongguan Youguang Kitchen Equipment Co., Ltd - Commercial Kitchen Equipment Supplier in China

Dongguan Youguang Kitchen Equipment Co., Ltd operates out of Dongguan, China and currently lists five distinct commercial kitchen products. The catalogue includes an electric double‑burner induction cooker, a line of commercial induction cooking utensils, a chicken fryer unit marketed for quick‑service outlets, a built‑in stainless‑steel dual‑induction module, and a stainless‑steel hot‑pot cooker designed for high‑volume service. All items are classified under HS chapters that cover electrical machinery (chapter 85) and stainless‑steel articles (chapter 73), which are the standard tariff headings for commercial cooking equipment. The supplier is recorded as an imported tier with a harbor trust level, indicating it ships from Chinese ports to overseas markets.

The electric double‑burner induction cooker typically offers two independent heating zones with power outputs from 1.5 kW to 3 kW per zone, digital touch controls, and compliance with IEC 60335‑2‑6 safety standards. Commercial induction cooking utensils are forged from ferromagnetic stainless steel, sized for rapid heat transfer and easy sanitation. The chicken fryer (Freidora de pollo) operates around 180 °C, includes stainless‑steel baskets and oil filtration, and follows standard food‑service fryer construction. The built‑in dual‑induction unit is a stainless‑steel countertop appliance intended for integration into kitchen worktops, while the hot‑pot cooker provides a single large heating surface for communal dining formats.

Product Range and Specialties of Dongguan Youguang Kitchen Equipment Co., Ltd

The product set focuses on electrically powered cooking solutions that are common in restaurant, catering and institutional kitchens. Induction cookers in this segment are usually rated between 2 kW and 7 kW total power, feature voltage compatibility with 220‑240 V mains, and meet IEC 60335‑2‑6 as well as local CE or UL requirements where applicable. Stainless‑steel utensils and built‑in modules are typically fabricated from 304 or 316 grade stainless steel, offering corrosion resistance and compliance with food‑contact regulations such as FDA 21 CFR 174.300. Deep‑fat fryers for chicken service normally have oil capacities of 20‑30 L, temperature control accuracy ± 2 °C, and safety interlocks that shut off power when the basket is removed. Buyers in the commercial kitchen sector often request material certification (e.g., SS 304/316 mill test report) and performance data sheets for each appliance.

Trade and Export Information - Dongguan Youguang Kitchen Equipment Co., Ltd

China is a leading exporter of commercial kitchen equipment, with major outbound shipments to Southeast Asia, the Middle East, Europe and North America. Products such as induction cookers and stainless‑steel fryers are typically classified under HS codes 8516.51 (induction cookers) and 7323.93 (stainless‑steel kitchen appliances). Importing countries frequently require CE marking for the European Union, UL listing for the United States, and compliance with local energy efficiency standards. Logistics for these medium‑size appliances usually involve 20‑ft or 40‑ft containers, with palletized packaging that protects the stainless‑steel finish and electronic components during sea freight.

Sourcing from Dongguan Youguang Kitchen Equipment Co., Ltd - Buyer Guidance

When sourcing from this supplier, request the IEC 60335‑2‑6 test report for each induction appliance and a mill test report confirming the stainless‑steel grade for the utensils and fryer components. Verify that the units are supplied with CE or UL documentation if the target market mandates it, and ask for a performance data sheet that specifies power consumption, temperature range and control accuracy. Confirm packaging dimensions, container loading plan and any pre‑shipment inspection reports to ensure the goods meet the buyer’s import compliance checklist.

What types of induction cookers does Dongguan Youguang offer?

The catalogue lists a double‑burner electric induction cooker and a built‑in dual‑induction module, both featuring separate power zones and digital control panels. Each unit is designed for 220‑240 V mains and conforms to IEC 60335‑2‑6 safety standards.

Are the stainless‑steel products food‑grade?

The utensils and hot‑pot cooker are fabricated from food‑contact stainless steel, typically 304 or 316 grade, which complies with FDA food‑contact regulations. Buyers can request a mill test report to confirm the exact grade.

What is the typical power rating for the chicken fryer?

The fryer is designed for commercial use with an oil heating capacity of 20‑30 L and a temperature setpoint around 180 °C. Power consumption is usually in the range of 3 kW to 5 kW, depending on the model.

Which HS codes apply to these products?

Induction cooking appliances are generally classified under HS 8516.51, while stainless‑steel kitchen appliances such as the hot‑pot cooker fall under HS 7323.93. These codes are used by customs authorities worldwide for tariff assessment.

What certifications should a buyer request?

Buyers should ask for IEC safety test reports, CE or UL conformity certificates depending on the destination market, and stainless‑steel mill test reports. Additional ISO 9001 quality‑management certification is common for Chinese manufacturers but must be confirmed.

How are the products packaged for export?

Typical export packaging involves sturdy wooden pallets, each unit wrapped in protective film and placed in corrugated boxes sized to prevent movement. Full container loads are usually shipped in 20‑ft or 40‑ft containers with weight distribution optimized for sea freight.

What is the usual lead time for an order?

Lead times for these commercial kitchen appliances generally range from 30 to 45 days after order confirmation, depending on production scheduling and container booking. Buyers should confirm the exact timeline during quotation.

Can samples be provided before a full order?

The supplier can arrange a single unit sample for testing, subject to the buyer covering shipping costs. Sample specifications should match the intended production model to verify performance and material compliance.