About Cash Impex - Tiles Supplier in India

India‑based Cash Impex lists five active tile products in its catalogue. The supplier’s portfolio includes PGVT Tiles, GVT Tiles, Porcelain Tiles, Nano Tiles and Full Body Tiles, all falling under the broader Tiles and Porcelain Tiles categories. Each product is identified by its specific name without further technical codes, and the catalogue does not provide HS codes or additional material descriptors. The active product count of five reflects the current range available for export from the Indian market. Cash Impex is classified in the “harbor” trust tier, indicating a moderate level of buyer confidence based on platform data.

Product Range and Specialties of Cash Impex

The catalogue enumerates PGVT Tiles, GVT Tiles, Porcelain Tiles, Nano Tiles and Full Body Tiles. In the tile industry, PGVT (Polished Glazed Vitreous Tiles) and GVT (Glazed Vitreous Tiles) are typically offered in formats ranging from 300 mm to 800 mm square, with thicknesses of 8 mm to 12 mm and a PEI (Porcelain Enamel Institute) slip‑resistance rating of 3 to 5. Porcelain Tiles are generally classified as low‑absorption tiles (water absorption ≤0.5 %) and are available in full‑body or glazed finishes; Nano Tiles often incorporate nano‑technology treatments to enhance stain resistance and may be supplied with anti‑bacterial certifications. Full Body Tiles are designed with a uniform body thickness, allowing edge‑to‑edge installation and are commonly rated for Class I or II slip resistance. Typical industry grades for these products include ISO 13006 compliance for dimensions and tolerances, and ASTM C1028 for static coefficient of friction.

Trade and Export Information - Cash Impex

Tile exports from India are usually recorded under HS Chapter 68 (HS code 6802 for ceramic tiles). Major import regions for Indian tiles include the Middle East, East Africa, the European Union and North America, where construction and interior‑fitout projects drive demand. Buyers typically request ISO 9001 quality‑management certification, ISO 14001 environmental compliance, and where applicable CE marking for the EU market. Standard export logistics involve loading tiles into 20‑ft containers (approximately 500 m² of 600 mm × 600 mm tiles per container) or 40‑ft containers for larger volumes, with CIF or FOB terms most common. Indian tile manufacturers often adhere to the Bureau of Indian Standards (BIS) for product safety, but specific certifications must be confirmed with each supplier.

Sourcing from Cash Impex - Buyer Guidance

When sourcing tiles from Cash Impex, buyers should request a detailed product data sheet that includes dimensions, thickness, water‑absorption rate, PEPE rating and any nano‑treatment specifications. Third‑party test reports for slip resistance (ASTM C1028 or ISO 10545‑4) and chemical resistance are standard documents that help verify compliance with project specifications. Samples of the actual tile surface, preferably a 300 mm × 300 mm piece, allow assessment of colour matching and finish before committing to a full order; minimum order quantities are typically expressed in container loads rather than individual pieces.

What tile formats does Cash Impex offer?

Cash Impex lists PGVT, GVT, Porcelain, Nano and Full Body Tiles. Each format is commonly supplied in square sizes from 300 mm up to 800 mm and thicknesses between 8 mm and 12 mm.

Are there standard certifications buyers should request?

Buyers should ask for ISO 9001 quality‑management certification and any product‑specific test reports such as water‑absorption (ISO 10545‑3) or slip‑resistance (ASTM C1028). CE marking is required for EU shipments.

What HS code applies to these tiles?

Tile products from India are generally classified under HS Chapter 68, specifically HS code 6802 for ceramic tiles.

How are the tiles typically packed for export?

Tiles are usually packed in wooden crates or reinforced cardboard boxes with individual tiles separated by cardboard separators, then loaded into 20‑ft or 40‑ft containers.

What is a typical lead time for an order?

Lead times depend on production scheduling but most Indian tile exporters quote 4‑6 weeks from order confirmation to shipment for standard sizes.

Can I obtain a sample before placing a full order?

Yes, suppliers normally provide a 300 mm × 300 mm sample of the requested tile finish; the sample is sent at the buyer’s expense unless otherwise agreed.

Which markets import Indian tiles most frequently?

The Middle East, East Africa, the European Union and North America are the primary import regions for Indian ceramic and porcelain tiles.

What documentation is needed for customs clearance?

Customs typically require a commercial invoice, packing list, certificate of origin, and any applicable test reports or conformity certificates referenced in the purchase contract.