About Carborail Pte. Ltd. - Thermal Coal Supplier in Philippines

The Philippines‑based Carborail Pte. Ltd. lists thirteen distinct thermal coal products in its current catalogue. The products are identified by codes such as KS‑41, CES‑47, MBL‑54, CPL‑55, BME‑56, BBPK‑61, TAJ‑62, BAP‑63, VGK‑46, VGK‑54, TJ‑64, TJ‑70 and SMC‑43. Each code is grouped under internal HS‑code families like ID‑TC‑4S, ID‑TC‑5S, ID‑TC‑6S, RU‑TC‑4S, RU‑TC‑5S, RU‑TC‑6S, RU‑TC‑7S and PH‑TC‑4S. The catalogue therefore covers a spectrum of thermal‑coal grades ranging from lower‑grade 4S to higher‑grade 7S classifications. All items are recorded as thermal coal, the primary fuel for power‑generation boilers.

Product Range and Specialties of Carborail Pte. Ltd.

Carborail’s catalogue includes thirteen thermal coal grades identified by product codes. The ID‑TC series (KS‑41, CES‑47, MBL‑54, CPL‑55, BME‑56) uses HS‑code families ID‑TC‑4S, ID‑TC‑5S and ID‑TC‑6S, while the RU‑TC series (VGK‑46, VGK‑54, TJ‑64, TJ‑70) follows RU‑TC‑4S through RU‑TC‑7S. The PH‑TC‑4S code applies to the SMC‑43 product, and all items are described as thermal coal. In the thermal coal market, grades are typically differentiated by calorific value (5,500 - 6,800 kcal/kg), ash content (10 - 30 %), moisture (2 - 6 %), sulfur (0.3 - 1.0 %) and particle size (0 - 25 mm). Buyers often request ISO 9001 quality management certification and SGS‑verified test reports for these parameters, and may refer to API 2 or local grade standards when specifying requirements.

Trade and Export Information - Carborail Pte. Ltd.

The Philippines exports thermal coal mainly to power‑intensive economies in East and South Asia, including Japan, South Korea, China and India. International trade of thermal coal falls under HS Chapter 27 (code 2701), and shipments are typically handled as bulk cargo on bulk carriers or in large‑volume containers. Importers usually require compliance with the destination country’s environmental regulations such as the EU REACH or US EPA standards, and they often ask for certificates of origin and third‑party laboratory analyses. Logistically, thermal coal is loaded in bulk onto 20‑ft or 40‑ft containers for smaller shipments, while larger volumes are shipped in 60‑70 kt bulk carriers. Common Incoterms include FOB Philippine ports and CIF to the buyer’s destination port, and buyers frequently request inspection certificates from agencies like SGS, Bureau Veritas or Intertek.

Sourcing from Carborail Pte. Ltd. - Buyer Guidance

When sourcing from Carborail, buyers should request a recent proximate analysis covering calorific value, moisture, ash, volatile matter and sulfur content. A full laboratory report that follows ASTM D3172 or ISO 17225 standards provides a reliable basis for quality verification. Additionally, an origin certificate and a copy of any third‑party inspection report help confirm the product’s compliance with import regulations. Typical minimum order quantities start at 10 tonnes, with lead times of approximately 30 - 45 days from order confirmation to vessel loading. Buyers should verify the exact HS‑code applicable to the selected grade (e.g., ID‑TC‑5S or RU‑TC‑6S) and confirm packaging details such as bulk bag size or bulk carrier loading plan before finalising the contract.

What types of thermal coal does Carborail Pte. Ltd. offer?

Carborail lists thirteen grades, including KS‑41, CES‑47, MBL‑54, CPL‑55, BME‑56, BBPK‑61, TAJ‑62, BAP‑63, VGK‑46, VGK‑54, TJ‑64, TJ‑70 and SMC‑43, each assigned to internal HS‑code families such as ID‑TC‑4S to RU‑TC‑7S.

Which HS‑code families are used for the listed products?

The catalogue references ID‑TC‑4S, ID‑TC‑5S, ID‑TC‑6S, RU‑TC‑4S, RU‑TC‑5S, RU‑TC‑6S, RU‑TC‑7S and PH‑TC‑4S, aligning the products with different thermal‑coal grade categories.

What quality parameters should I request for thermal coal?

Buyers normally ask for calorific value (kcal/kg), moisture (%), ash (%), sulfur (%) and particle size distribution, documented in a laboratory report that follows ASTM D3172 or ISO 17225.

Are any certifications required for importing this coal?

Importers typically require a certificate of origin, a third‑party inspection report (e.g., SGS or Bureau Veritas), and may request ISO 9001 or ISO 14001 compliance depending on the destination market.

What are the common packaging and shipping methods?

Thermal coal is shipped in bulk either in 20‑ft/40‑ft containers for smaller volumes or in bulk carriers for larger shipments, using FOB or CIF Incoterms.

What is the typical minimum order quantity and lead time?

Minimum order quantities usually start at 10 tonnes, with a lead time of approximately 30 - 45 days from order confirmation to vessel loading.

Which markets typically import thermal coal from the Philippines?

Major import markets include Japan, South Korea, China and India, where the coal is used for power generation and industrial heating.

How can I verify the grade of the coal before purchase?

Request a recent lab analysis report, confirm the HS‑code classification, and, if needed, arrange a pre‑shipment inspection by an accredited agency.