About Astha Export - Blocks, Tiles & Slabs Supplier in India

India is the origin country of Astha Export, which currently lists 97 active products across its catalogue. The supplier’s offerings concentrate on building‑material categories such as ceramic and vitrified tiles, porcelain tiles, glass mosaic tiles, terrazzo tiles, PVC facing ceiling tiles, reflective glass tiles, chequered tiles, and interlocking concrete paver blocks. Each product entry includes the corresponding HS‑code family - for example 6908.90 for glazed ceramic wall tiles, 6907.21 for porcelain and vitrified tiles, 7016 series for tempered or colored glass tiles, 6802.91 for terrazzo composites, 3918.10 for PVC ceiling tiles, and 6810 series for precast concrete pavers. The catalogue also mentions ancillary items such as pans, urinals, table tops and sink components without HS codes. This composition reflects a focus on finished surface and flooring solutions suitable for residential, commercial and infrastructure projects.

The listed ceramic wall tiles (Wall Elevation Tiles, Bathroom Wall Tiles, Kitchen Wall Tiles) are classified under HS 6908.90 and are described as glazed ceramic, a material commonly produced with a water absorption of less than 0.5 % and a PEI rating ranging from 1 to 5 depending on glaze thickness. Porcelain and vitrified tiles (product names Porcelain Tile, Vitrified Tile, Vitrified Tiles - Double Charge) fall under HS 6907.21 and typically meet EN 14411 specifications, with body densities above 2.2 g/cm³ and thicknesses between 8 mm and 12 mm. Glass tiles listed under HS 7016.10/7016.90 are tempered or colored glass mosaics, usually 4 mm to 6 mm thick and conforming to ASTM C1048 for impact resistance. The paver blocks, recorded under HS 6810.11‑19, are precast concrete elements with compressive strengths reported between 30 MPa and 40 MPa (M30‑M40 grades).

Product Range and Specialties of Astha Export

The Astha Export catalogue comprises glazed ceramic wall tiles for interior elevations, vitrified and double‑charge tiles for high‑traffic flooring, and a series of tempered glass mosaic tiles used in pools, façades and decorative applications. In the tile industry, glazed ceramic tiles are graded by PEI (Porcelain Enamel Institute) ratings from 1 (low traffic) to 5 (heavy traffic), and buyers typically verify water absorption below 0.5 % and slip‑resistance values (R9‑R13). Vitrified tiles are valued for low porosity (<0.2 % water absorption) and dimensional stability, and double‑charge variants add a pigmented dust‑press layer for enhanced colour consistency.

The concrete paver blocks listed - interlocking types such as Colorodo, Uni Paver, Damaroo, Trihex and Hexagon - are produced from M30‑M40 grade mixes, a standard range that delivers compressive strengths of 30‑40 MPa and frost‑resistance suitable for external paving. Industry standards for such pavers include IS 383 (Indian Standard for concrete masonry units) and EN 1338 for interlocking paving stones. Glass tiles in the catalogue, ranging from clear tempered panels to coloured mosaic sheets, are commonly supplied in 20 ft containers with protective cardboard and wooden pallets, and conform to IEC 60587 for safety glazing.

Trade and Export Information - Astha Export

India is among the world’s top exporters of ceramic and vitrified tiles, glass mosaics and concrete paver blocks. Major import destinations include the United Arab Emirates, Saudi Arabia, Qatar, South Africa, the United Kingdom and the United States, where construction and interior‑fit‑out projects drive demand. The HS‑code families used by Astha Export (6908, 6907, 7016, 6802, 3918, 6810) are subject to standard customs duties and often require a certificate of origin, a commercial invoice and a packing list. Buyers typically request ISO 9001 quality‑management certification, CE marking for EU markets, and compliance with EN 14411 for tiles or ASTM C144 for concrete pavers.

Tile shipments are normally packed on Euro‑pallets with shrink‑wrap and loaded in 20 ft or 40 ft containers, allowing 10‑12 tonnes per 20 ft box for ceramic tiles and up to 15 tonnes for glass mosaics. Paver blocks are stacked on wooden pallets or in bulk bags, with container loads of 20‑25 cubic metres. Common incoterms used by Indian exporters are FOB (Port of Nhava Sheva) and CIF to the buyer’s destination port. Pre‑shipment inspection agencies such as SGS or Bureau Veritas often verify dimensions, weight, and compliance with the relevant ISO or EN standards before loading.

Sourcing from Astha Export - Buyer Guidance

Buyers sourcing tiles from Astha Export should obtain product data sheets that specify dimensions, thickness, water absorption, PEI rating, slip‑resistance value (R‑rating) and the glaze composition. Request a third‑party test report (e.g., from an accredited lab) confirming compliance with EN 14411 or ASTM C373 for water absorption. Samples of at least one full tile size are advisable to assess colour match and surface finish before confirming bulk orders.

For concrete paver blocks, confirm the compressive strength grade (M30‑M40) and the mix design, and ask for a certificate confirming adherence to IS 383 or EN 1338. Glass tile buyers should verify tempering certification (IEC 60587) and request a sample panel to check colour consistency and edge finish. Verify the HS code on the commercial invoice matches the product description, and ensure the supplier can provide a certificate of origin and, where required, an ISO 9001 certificate.

What types of wall tiles are available in the catalogue?

Astha Export lists glazed ceramic wall tiles for elevations, bathrooms and kitchens under HS 6908.90, as well as vitrified wall tiles (HS 6907.21) and double‑charge vitrified tiles that use a pigmented dust‑press surface.

How can I obtain a sample of the glass mosaic tiles?

Buyers can request a sample sheet of the tempered or coloured glass tiles (HS 7016.10/7016.90) through the supplier’s trade portal; samples are typically shipped in a small parcel with protective packaging and a brief lead time of 7‑10 days.

Which certifications are commonly required for importing vitrified tiles from India?

Importers usually ask for ISO 9001 quality‑management certification, CE marking for EU shipments, and compliance documentation with EN 14411 or ASTM C1028 for slip resistance. A test report confirming water absorption below 0.2 % is also standard.

What is the typical lead time for a bulk order of interlocking paver blocks?

Production and preparation of interlocking concrete pavers (HS 6810.11‑19) generally require 25‑35 working days after receipt of a confirmed purchase order and sample approval, depending on the mix grade and volume.

How are the porcelain tiles packaged for export?

Porcelain tiles are packed in cardboard boxes placed on Euro‑pallets, shrink‑wrapped, and loaded into 20 ft or 40 ft containers. Each box usually contains 20‑25 tiles of a standard 600 mm × 600 mm size, with a total weight of about 10‑12 tonnes per 20 ft container.

Are the listed paver blocks compliant with any international standards?

The concrete paver blocks are produced to M30‑M40 grade specifications, which align with Indian Standard IS 383 and European Standard EN 1338 for interlocking paving stones. Buyers should request the corresponding test certificates.

Which HS codes apply to the different tile categories in the catalogue?

Ceramic wall tiles and chequered tiles use HS 6908.90, porcelain and vitrified tiles use HS 6907.21, glass mosaic and tempered glass tiles fall under HS 7016.10 or 7016.90, terrazzo tiles are classified under HS 6802.91, PVC ceiling tiles under HS 3918.10, and interlocking concrete paver blocks under HS 6810.11‑19.