About Anping De Xiang Rui Wire Cloth Co., Ltd. - Wire Mesh Supplier in China

Anping De Xiang Rui Wire Cloth Co., Ltd. operates in China and currently lists twelve distinct wire mesh products in its catalogue. The product list includes crimped wire mesh, square wire mesh, wire mesh for filter discs, black wire cloth, welded wire mesh, hexagonal wire mesh, stainless‑steel wire mesh, brass wire mesh, conveyor belt mesh, and several items described as “Blace wire mesh”, “Meshes‑for‑oided industry”, and “Matal mesh”. Each entry is presented under the generic category of wire mesh without further subdivision in the source data. The supplier is classified as an imported tier with a harbor trust tier, indicating it sources or ships its goods through major Chinese ports.

The catalogue does not provide HS codes for individual items, but all products belong to the broader wire cloth family covered by HS chapter 73, heading 7315. The range spans both stainless‑steel and brass materials as well as various mesh geometries such as square, hexagonal and crimped forms. No specific certifications are listed for the supplier, so buyers should verify compliance with industry standards independently. The product count of twelve suggests a focused portfolio rather than a broad spectrum of unrelated goods.

Product Range and Specialties of Anping De Xiang Rui Wire Cloth Co., Ltd.

The supplier’s catalogue enumerates several wire mesh geometries: crimped, square, hexagonal, welded and specialized meshes for filter discs or conveyor belts. In the metal mesh industry, crimped and welded meshes are often specified by wire diameter (typically 0.2 mm to 2.5 mm) and opening size (ranging from 1 mm to 20 mm). Stainless‑steel meshes are commonly produced from grades 304 or 316 and must meet ASTM A123 for corrosion resistance, while brass meshes follow ASTM B197 for alloy composition. Typical brass wire mesh grades are measured by wire gauge (e.g., 24 AWG) and mesh count per inch (e.g., 10 × 10). Hexagonal meshes are frequently used in filtration and are graded by mesh count and aperture tolerance. Black‑coated wire cloth often meets ISO 10884 for surface finish and may be used where corrosion protection is required. The industry also references EN 12478 for wire cloth used in construction and automotive applications.

Trade and Export Information - Anping De Xiang Rui Wire Cloth Co., Ltd.

China is a leading exporter of wire mesh products, supplying automotive manufacturers, construction firms, HVAC and filtration equipment makers worldwide. Wire mesh items fall under HS code 7315.90 (other wire cloth), and shipments are usually packed in wooden crates or bulk bags with moisture barriers to prevent rust. Common export destinations include the United States, European Union, Southeast Asia and the Middle East, where buyers often require ISO 9001 quality management certification and, for certain applications, CE marking or RoHS compliance. Chinese exporters typically use FOB or CIF Incoterms, with container loads ranging from 20‑ft (approximately 1,200 kg) to 40‑ft (up to 2,400 kg) depending on mesh weight and packaging.

Regulatory checks at Chinese ports often involve customs inspection for correct HS classification and verification of material certificates. Buyers importing into the EU must ensure the mesh complies with REACH registration for metal alloys, while US imports may be subject to ASTM standard verification through third‑party labs. Shipping logistics commonly involve consolidation at major ports such as Shanghai, Ningbo or Shenzhen before trans‑shipment to destination hubs.

Sourcing from Anping De Xiang Rui Wire Cloth Co., Ltd. - Buyer Guidance

When sourcing wire mesh from this supplier, buyers should request material test reports confirming alloy grade (e.g., 304 SS, 316 SS, or brass composition) and dimensional inspection reports showing wire diameter and mesh opening tolerances. Samples should be examined for surface finish, coating integrity (for black wire cloth) and weld quality in welded meshes. Buyers are advised to ask for compliance certificates such as ISO 9001, and where applicable, CE declaration of conformity for construction‑grade meshes. Verification of the HS code used on the commercial invoice (typically 7315.90) helps avoid customs delays.

It is prudent to confirm the minimum order quantity and lead time for each mesh type, as production cycles can differ between stainless‑steel and brass alloys. Packaging specifications - such as moisture‑proof wrapping or inner liners - should be clarified to protect the mesh during sea freight. Before finalising a contract, buyers may request a third‑party inspection report (e.g., SGS or Bureau Veritas) to validate that the mesh meets the stipulated ASTM or ISO standards.

What wire mesh geometries does Anping De Xiang Rui offer?

The catalogue lists crimped, square, hexagonal, welded and specialty meshes such as filter‑disc and conveyor‑belt meshes, covering a range of mesh openings and wire diameters.

Which materials are used for the meshes?

Materials include stainless steel (typically grades 304 or 316), brass alloy, and coated steel for black wire cloth. The specific alloy is confirmed in the material test report.

What HS code is applicable to these products?

Wire mesh products from this supplier are generally classified under HS heading 7315.90, which covers other wire cloth and woven wire products.

Which certifications should a buyer request?

Buyers should request ISO 9001 quality‑management certification, material test reports to ASTM standards, and, where required, CE or RoHS compliance documents.

What are typical size specifications for the meshes?

Typical specifications include wire diameters from 0.2 mm to 2.5 mm and mesh openings ranging from 1 mm to 20 mm, with exact dimensions provided in the product data sheet.

How are the meshes packaged for export?

Exports are usually packed in moisture‑proof wooden crates or bulk bags, with each container load optimized for 20‑ft or 40‑ft sea containers depending on weight.

What lead times are common for these products?

Lead times vary by material; stainless‑steel meshes often require 4‑6 weeks, while brass or coated meshes may be ready in 3‑5 weeks, subject to order size.

What documentation is needed for customs clearance?

Customs typically requires a commercial invoice with the correct HS code, a packing list, a certificate of origin, and any applicable compliance certificates (e.g., ISO 9001, CE).