About Akshar Exports - Hardware Components Supplier in India

India hosts Akshar Exports, which currently lists five distinct hardware items in its catalogue. The active product count of five includes brass hinges, earth rods, conduit fittings, brass terminal pins and battery terminals, each classified under standard HS chapters for metal fittings and electrical components. The supplier’s catalogue groups these items as metal hardware and electrical accessories, reflecting typical product families found in industrial supply catalogs. By focusing on these five items, Akshar Exports presents a concise portfolio that aligns with common procurement categories for construction and electrical installation.

The listed products cover both mechanical and electrical applications. Brass hinges are commonly used in doors and cabinets, earth rods serve as grounding electrodes, conduit fittings connect protective tubing, brass terminal pins provide secure electrical connections, and battery terminals complete power circuits. Each product type follows established industry dimensions - for example, brass hinges often range from 30 mm to 120 mm in length, while earth rods are typically 1.5 m to 3 m long. The catalogue therefore addresses a spectrum of end‑use scenarios without extending into unrelated product groups.

Product Range and Specialties of Akshar Exports

Akshar Exports’ catalogue includes brass hinges that are usually forged from C260 brass, offering a tensile strength of 350 MPa and a corrosion‑resistant zinc or nickel plating. Standard hinge sizes run from 30 mm to 120 mm leaf length with a pin diameter of 4 mm to 8 mm, and load ratings commonly range between 50 kg and 200 kg per hinge. Earth rods are supplied as galvanized steel rods, typically 12 mm to 16 mm in diameter and 1.5 m to 3 m in length, conforming to IEC 62305 grounding standards and often tested for a minimum tensile strength of 350 MPa. Conduit fittings listed include both PVC and metal couplings, elbows and connectors sized from 20 mm to 100 mm in nominal diameter, frequently meeting IEC 60529 IP ratings of IP44 or higher. Brass terminal pins are produced in sizes such as 2 mm × 5 mm or 3 mm × 7 mm, with electrical conductivity exceeding 95 % IACS and are designed for crimp or screw‑type connections. Battery terminals are offered in brass or lead‑alloy variants, rated for currents from 5 A to 100 A, and typically feature a plating thickness of 0.5 µm to 2 µm for corrosion protection. Industry practice for these categories includes ISO 9001 quality management, CE marking for EU markets, and RoHS compliance for lead‑free requirements.

Trade and Export Information - Akshar Exports

India’s metal‑hardware and electrical component sector routinely exports to the Middle East, East Africa, Southeast Asia and the European Union, where construction and infrastructure projects drive demand for hinges, grounding rods and conduit accessories. The typical HS chapters for these items are 7615 (brass fittings), 8302 (other metal fittings) and 8536 (electrical apparatus for switching or protecting circuits). Buyers often request compliance with IEC standards, CE certification for EU entry, and RoHS declarations to meet environmental regulations. Shipping is usually arranged in 20‑foot or 40‑foot containers, with hinges and terminal pins packed in cardboard boxes, earth rods and conduit fittings bundled in wooden crates, and battery terminals sealed in anti‑static bags. Indian exporters commonly work under Incoterms such as FOB Mumbai or CIF Dubai, and they must provide phytosanitary or customs certificates only where required by the destination country’s import regime.

Sourcing from Akshar Exports - Buyer Guidance

When sourcing brass hinges or terminal pins from Akshar Exports, buyers should request a material test report that confirms alloy composition (e.g., C260 brass) and mechanical properties such as tensile strength and hardness. For earth rods and conduit fittings, a certificate of conformity to IEC 62305 grounding standards or IEC 60529 IP rating is typical, together with a dimensional drawing showing length, diameter and thread specifications. Battery terminals should be accompanied by a lead‑content analysis to verify RoHS compliance and a current‑carrying capacity test report. Buyers are advised to verify packaging details - such as crate dimensions for earth rods or box count for hinges - and to confirm the supplier’s ability to meet standard MOQ levels (often 500 pcs for hinges, 100 pcs for terminal pins) and lead times, which range from 15 to 30 days for stocked items.

What material grades are used for the brass hinges listed by Akshar Exports?

The hinges are typically made from C260 brass, a copper‑zinc alloy that provides good corrosion resistance and a tensile strength around 350 MPa.

Are the earth rods suitable for lightning protection systems?

Yes, the earth rods are galvanized steel, 12 mm to 16 mm in diameter and 1.5 m to 3 m long, meeting IEC 62305 grounding specifications used in lightning protection.

Which certifications should a buyer request for the conduit fittings?

Buyers should ask for IEC 60529 IP rating documentation, CE marking for EU shipments, and a material conformity certificate indicating whether the fittings are PVC or metal.

What are the typical current ratings for the battery terminals?

The battery terminals are offered in current ratings from 5 A up to 100 A, with a plating thickness of 0.5 µm to 2 µm to ensure corrosion resistance.

How are the brass terminal pins packaged for export?

Terminal pins are usually packed in cardboard boxes with a specified quantity per box, and each box is sealed in a moisture‑resistant sleeve to protect against corrosion during transit.

What documentation is required to verify RoHS compliance for the products?

A RoHS declaration or test report showing lead, mercury, cadmium and hexavalent chromium levels below the EU limits should be requested for all metal components.

What are the common Incoterms used by Indian suppliers for these hardware items?

Indian exporters of hardware commonly use FOB Mumbai or CIF Dubai, allowing the buyer to arrange inland transport from the Indian port.

What is the typical minimum order quantity for the conduit fittings?

Standard MOQ for conduit fittings is usually 100 pcs per size, though larger orders may be negotiated depending on the buyer’s project scale.