Import Fluoroelastomer — Buy in Bulk from Supplier in China

Fluoroelastomer is a high‑performance synthetic rubber supplied by Zhejiang Fluorine Chemical New Material Co., Ltd. The material has a measured density of 1.82 g/cm³ and a Mooney viscosity of 1+10 ml recorded at 121 °C. Tensile strength before ageing is reported between 888 and 999 MPa, and after ageing at 275 °C for 24 h the same range is retained. Elongation at break is listed as 200‑220 % both before and after the 275 °C ageing cycle, indicating good stretchability.

The product belongs to the FKM class of fluoroelastomers, which are typically formulated for resistance to oils, fuels and aggressive chemicals. Industry data shows a standard operating temperature range of - 20 °C to 250 °C and a typical Shore A hardness of 70‑80. These characteristics make the material suitable for sealing components that experience high thermal and chemical stress. Packaging is supplied in sealed polyethylene bags placed inside cartons with a net weight of 20 kg per carton.

Automotive manufacturers, aerospace engineers and oil‑field equipment makers commonly source this fluoroelastomer for O‑rings, gaskets and vibration‑damping parts. Buyers should confirm the minimum order quantity, preferred Incoterms and expected lead time directly with the supplier. The product is shipped in bulk cartons and can be consolidated into container loads; payment methods such as T/T or L/C are usually accepted but must be agreed in advance.

Zhejiang Fluorine Chemical New Material Co., Ltd. is located in the Zhejiang Hangzhou Gulf Industrial Zone, Hangzhou 312300, Zhejiang, China. The company is classified as an imported supplier with a harbour‑level trust tier; the platform records a response rate of 0 % and no average response time, indicating that enquiries may require follow‑up through alternative channels. The firm lists fluoroelastomer as its primary product and supplies the material sealed in polyethylene bags within 20 kg cartons.

The supplier’s public profile does not disclose production capacity, certifications or specific client references. All technical data presented derives from the listing description, and any additional documentation such as material data sheets or test certificates should be requested directly from the company before finalising a purchase.