Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›

Center Enamel Co., Ltd. supplies glass-fused-to-steel biogas tanks with double membrane roof systems, engineered for anaerobic digestion and biogas storage. The listed capacity is 50,000 gallons, constructed with corrosion-resistant glass-fused steel panels that bond vitreous enamel to steel substrates. The double membrane roof comprises an outer weather protection membrane and an inner gas-holding membrane, creating a flexible gas storage system that adjusts to pressure and volume changes. This configuration is standard for agricultural digesters and wastewater treatment facilities where gas tightness and structural longevity are critical.
The glass-fused-to-steel construction method involves firing enamel coatings at 820-850 degrees Celsius onto pre-fabricated steel sheets, producing a composite with the structural strength of steel and the chemical inertness of glass. Typical enamel thickness ranges from 0.25mm to 0.45mm per side, with standard grades meeting AWWA D103-19 for bolted steel tanks or EN 15282 for enamelled steel. The membrane roof material is typically reinforced polyester fabric with PVC or TPU coating, with typical gas permeability below 0.5 m³/m²/day at 1000Pa pressure difference. Bolted panel construction allows field assembly without welding, reducing installation time and eliminating hot-work permits on site.
Buyers for this system include agricultural biogas plant operators, municipal wastewater treatment authorities, food waste processing facilities, and industrial effluent treatment plants. The 50,000-gallon capacity suits medium-scale operations producing 200-500 m³ biogas daily. Trade terms require direct confirmation with Center Enamel Co., Ltd., as the listing does not specify binding MOQ, lead times, or pricing. Packaging is described as bulk supply configuration. Payment instruments and Incoterms stated in the source require verification before contract commitment.
| Tank Capacity | 50,000 gallons (189,270 litres, supplier-stated) |
| Primary Construction Material | Glass-fused-to-steel panels (vitreous enamel bonded to steel substrate, standard) |
| Roof System | Double membrane roof (outer weather protection, inner gas storage membrane, standard biogas design) |
| Typical Enamel Coating Thickness | 0.25 - 0.45mm per face (typical industry range for bolted enamelled steel tanks) |
| Applicable Design Standard | AWWA D103-19 or EN 15282 (typical; confirm specific compliance with supplier) |
| Typical Membrane Gas Permeability | <0.5 m³/m²/day at 1000Pa (typical for reinforced PVC/TPU biogas membranes) |
| Connection Method | Bolted panel assembly, field-erected without welding (standard construction method) |
| Intended Applications | Agricultural digesters, wastewater treatment plants, food waste processing, industrial effluent (supplier-stated) |
| Corrosion Resistance | Superior to bare steel in anaerobic, hydrogen sulphide-rich environments (inherent to glass-fused construction) |
| Installation Characteristic | Modular panel system for reduced on-site assembly time (supplier-stated advantage) |
Center Enamel Co., Ltd. is located in Guangzhou, Guangdong Province, with the address recorded as Guangzhou 510403, China. The supplier holds an imported tier classification and a harbor trust tier, indicating a profiled but not fully verified status within standard marketplace protocols. The response rate is recorded at 0.00 percent with an average response time of zero hours, which suggests no active response data is available through the platform. Buyers should treat all communication and verification claims as unconfirmed until direct engagement establishes response reliability.
The supplier lists biogas tanks with membrane roof systems as a core product line, with glass-fused-to-steel construction as a stated technical differentiator. No verified factory audit, ISO certification, or specific project references are present in the source data. The company description provided by the supplier emphasises durability, easy installation, and eco-friendly credentials, but lacks specific manufacturing capacity, annual output figures, or in-service track record. Buyers should request factory registration documents, quality management system certificates, and reference installations before committing to volume orders.
| Business Type | Supplier |
| Year Established | Recently Joined |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| Response Time | <4h |
| Response Rate | New Supplier |
Before ordering from Center Enamel Co., Ltd., verify the company's business registration and manufacturing licence through the Guangdong Administration for Market Regulation. Request ISO 9001 and ISO 14001 certificates with scope covering glass-fused-to-steel tank production, and verify certificate validity through the issuing accreditation body. Ask for material certificates for the steel substrate (typically Q235B or Q345B for Chinese manufacture) and enamel frit composition. Confirm that the double membrane roof is sourced from a recognised membrane specialist or manufactured in-house, and request membrane material test reports. If the supplier cannot provide these documents, treat the technical claims as unverified.
Logistics from Guangzhou typically export through Guangzhou Nansha Port or Shenzhen Yantian Port. Confirm Incoterms with Center Enamel Co., Ltd., as the source mentions FOB and CIF without specifying ports. For glass-fused-to-steel panels, container loading requires careful sequencing to prevent enamel chipping, flat-rack or open-top containers may be necessary for large roof components. Lead times for bolted tank manufacture typically range 8-16 weeks depending on order size and coating line availability, but this must be confirmed in writing. Payment terms mentioned include L/C and T/T, negotiate staged payments with retention until successful commissioning. Request a detailed packing list specifying crating, moisture protection, and handling instructions for enamelled surfaces.
Quality checks on arrival should include visual inspection of all panels for enamel chips, cracks, or rust spots, which indicate coating failure. Use a holiday detector (spark test) on a representative sample to identify pinholes or thin spots. Measure panel flatness and bolt hole alignment before assembly, as deviations exceeding 2mm can cause gasket compression failures. During erection, verify bolt torque with calibrated wrenches and re-torque after 30 days of operation as gasket settlement occurs. Commission a gas tightness test (pressure hold test at operating pressure plus 20 percent for 24 hours) before accepting the system. Retain 10-15 percent payment until this test passes and the supplier provides as-built drawings and maintenance manuals in your required language.
Active buying requirements from importers looking for Similar products
Compare alternatives, find similar products and connect with verified suppliers
When sourcing Biogas Tanks With Membrane Roof for your business, securing the right balance of quality and cost is essential. Center Enamel Co., Ltd., a verified supplier based in China, offers this product for international export. By purchasing directly from the manufacturer or authorized exporter, buyers can negotiate favorable FOB prices starting at $10000/Bags and manage bulk orders with a minimum order quantity (MOQ) of 1 Bags. This product is a staple in the Storage Tanks sector with strong demand from importing countries worldwide.
Importing Biogas Tanks With Membran requires careful attention to shipping logistics, customs compliance, and secure payment terms. Center Enamel Co., Ltd. offers flexible shipping options such as Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Common payment methods for international B2B transactions include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P). All transactions and RFQs are facilitated through EximNext, a leading global B2B marketplace designed to make cross-border trade secure and efficient.
Finding trustworthy partners is the foundation of successful importing. The supplier of this Biogas Tanks With Membran has been verified on our platform. Whether you are a distributor, wholesaler, or procurement manager, you can request a free quotation, ask for product samples, and finalize your bulk purchase with confidence. EximNext hosts thousands of verified manufacturers and exporters across 200+ countries. Explore similar products in the Storage Tanks category and connect with top-tier exporters on our comprehensive import export marketplace. Start your sourcing journey today.
Importing Biogas Tanks With Membran requires careful attention to shipping logistics, customs compliance, and secure payment terms. Common shipping options include Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Buyers should verify import duties in their destination country. Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P).
The current listed wholesale price for Biogas Tanks With Membrane Roof from Center Enamel Co., Ltd. is $10000/Bags on FOB terms from China. Prices may vary depending on order volume, packaging, and destination. For the most accurate bulk quote, send a direct RFQ to Center Enamel Co., Ltd. through EximNext.
The supplier, Center Enamel Co., Ltd., has set a Minimum Order Quantity (MOQ) of 1 Bags for Biogas Tanks With Membran. For sample requests or smaller trial orders, contact the supplier directly through our platform's inquiry system.
The HS Code classification for Biogas Tanks With Membrane Roof depends on the specific grade and form. Contact Center Enamel Co., Ltd. through EximNext for the exact HS Code and customs documentation required for your destination country.
To import Biogas Tanks With Membran from China, negotiate shipping terms (FOB, CIF, or EXW) directly with Center Enamel Co., Ltd.. Ensure you have the necessary import licenses for Storage Tanks products in your destination country.
Yes, Center Enamel Co., Ltd. is a verified supplier on EximNext. You can view their complete company profile, business registration details, certifications, and export history before placing a bulk order.
For a complete technical data sheet or Certificate of Analysis (COA), send an inquiry directly to Center Enamel Co., Ltd. through EximNext.
Center Enamel Co., Ltd. offers Biogas Tanks With Membran with standard export packaging. Custom packaging, private labeling, and OEM/ODM options may also be available for large wholesale orders.
Biogas Tanks With Membran is actively imported by buyers worldwide. Request a destination-specific CIF or CFR quote from Center Enamel Co., Ltd. through our platform.
Center Enamel Co., Ltd. maintains international quality certifications. These ensure that the Biogas Tanks With Membran meets international quality, safety, and regulatory standards required for cross-border trade.
Click "Request Quotation" on this product page, specify your required quantity, preferred shipping terms, and destination country. Center Enamel Co., Ltd. will respond with a detailed wholesale quote including FOB pricing, lead time, and payment options.
Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), Documents against Payment (D/P), and Escrow services. Confirm accepted terms directly with Center Enamel Co., Ltd..
Discover more products in Storage Tanks from verified suppliers worldwide.