Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›

Nakaumi Viet Nam Co., Ltd produces full-thread stainless steel bolts in SUS 304, SUS 316, SUS 310 and SUS 403 grades, with metric thread sizes running M6 to M24 and fractional sizes from W5/16 to W3/4. Lengths extend from 30 mm up to 4000 mm, covering both compact fittings and long structural tie rods. Durability classes of 4.8 and 6.8 are available when specified, with a clear passivated surface finish that preserves the native corrosion resistance of the alloy.
SUS 304 offers general-purpose austenitic corrosion resistance for interior and mild exterior service, while SUS 316 adds molybdenum for chloride-rich environments such as coastal or chemical installations. SUS 310 provides elevated-temperature oxidation resistance, and SUS 403 is a hardenable martensitic grade for applications requiring higher strength and moderate corrosion resistance. The all-thread design allows full engagement of nuts and tapped components along the entire fastener length, a standard requirement in structural and piping assemblies where partial threading would reduce adjustability and load distribution.
These bolts serve marine rigging, chemical processing plants, food processing equipment, architectural metalwork and general construction where galvanic corrosion or rust staining must be avoided. Buyers typically specify grade, size, length, thread pitch and durability class against project standards such as ASTM A193 or ISO 3506. Containerised bulk export is standard; buyers should confirm packing units, thread pitch availability and mill test certificates direct with Nakaumi Viet Nam Co., Ltd before placing volume orders.
| Material Grades | SUS 304, SUS 316, SUS 310, SUS 403 (austenitic and martensitic stainless steels) |
| Metric Thread Size | M6 to M24 (standard coarse pitch typical) |
| Fractional Thread Size | W5/16 to W3/4 (Whitworth or UNC typical, confirm with supplier) |
| Length Range | 30 mm to 4000 mm |
| Durability Class | 4.8 and 6.8 when required (yield and tensile strength per ISO 898-1 typical for stainless equivalents) |
| Surface Finish | Clear (passivated, natural stainless appearance) |
| Thread Type | Full thread (all-thread, continuous thread along entire shank) |
| Typical Standards Compliance | ASTM A193, ISO 3506 (typical for stainless steel bolts; confirm grade-specific certification with supplier) |
| Typical Packaging | Bulk in containers, cartons or wooden crates (standard export packing typical; confirm unit weight and protection method with supplier) |
| Typical Application Temperature | SUS 310 rated to 1035 °C continuous service typical; SUS 304/316 to 870 °C intermittent typical |
Nakaumi Viet Nam Co., Ltd is based at B1 My Xuan Area, Phu My, 790000, Viet Nam, operating from the Phu My industrial zone near southern coastal ports. The company holds a harbor trust tier on the platform, with a response rate currently showing 0.00 percent and zero recorded average response hours. This profile indicates limited platform engagement data rather than a verified absence of activity; buyers should treat direct communication as the primary channel for confirming operational status and quotation turnaround.
The supplier lists all-thread stainless steel bolts as a core export line, with explicit mention of quality assurance and fast delivery in its materials. No additional certifications, factory audit results, annual revenue figures, employee counts or named client references appear in the available profile. Buyers should request ISO 9001 or IATF 16949 certification status, mill test certificates to EN 10204 3.1 or 3.2, and prior export documentation before committing to volume orders.
High-quality all-thread stainless steel bolts are available in SUS 304, 316, 310, and 403 grades, covering metric sizes M6 to M24 and fractional sizes W5/16 to W3/4 with lengths from 30mm up to 4000mm. These full-thread fasteners are ideal for construction, marine, chemical processing, and industrial applications where corrosion resistance and structural strength are critical. Available in durability classes 4.8 and 6.8 with clear surface finish, suitable for global export trade in containers and bulk packaging.
| Business Type | Supplier |
| Year Established | Recently Joined |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| Response Time | <4h |
| Response Rate | New Supplier |
Before ordering, verify that Nakaumi Viet Nam Co., Ltd can supply mill test certificates matching your project's steel grade requirements, specifically the chemical composition limits for chromium, nickel and molybdenum in SUS 316 and the carbon content in SUS 403. Request dimensional inspection reports for the diameter and length combination you need, particularly if ordering 3000-4000 mm lengths where straightness tolerance becomes critical. Confirm the supplier's quality management system certification and whether they have supplied to marine or chemical projects with comparable specification requirements.
Logistics from Phu My, Viet Nam typically utilise Ho Chi Minh City or Vung Tau port for sea freight. Confirm Incoterms offered (EXW, FOB, CIF typical for Vietnamese fastener exports), container loading configurations, and whether the 0.00 percent platform response rate reflects actual communication delays. Establish expected production lead time for both stock and non-stock sizes, noting that long all-thread rods may require special packing to prevent bending in transit. Payment terms common in Vietnamese B2B trade include 30 percent deposit with balance against bill of lading, but letter of credit terms should be negotiated for initial orders.
On arrival, inspect a representative sample for thread form accuracy using go/no-go gauges, measure actual versus ordered length, and verify material grade with a portable PMI analyser if possible. Check for surface defects, thread damage from handling, and correct passivation appearance (no discoloration or iron contamination). Retain certificates for traceability; for structural applications, consider third-party inspection before shipment release. Document any discrepancies immediately and agree remedy procedures with the supplier before final payment release.
Active buying requirements from importers looking for Similar products
Compare alternatives, find similar products and connect with verified suppliers
When sourcing All Threaded Bolt Stainless for your business, securing the right balance of quality and cost is essential. Nakaumi Viet Nam Co., Ltd, a verified supplier based in Viet Nam, offers this product with key specifications including SUS 304, SUS 316, SUS 310, SUS 403 (full thread/all-thread bolt), M6 - M24 (metric); W5/16 - W3/4 (imperial fractional), and 30mm - 4000mm. By purchasing directly from the manufacturer or authorized exporter, buyers can negotiate favorable FOB prices starting at $0.65/Bags and manage bulk orders with a minimum order quantity (MOQ) of 1 Bags. This product is actively traded under HS Code 7318.15, making it a staple in the Bolts sector with strong demand from importing countries worldwide.
Importing All Threaded Bolt Stainle requires careful attention to shipping logistics, customs compliance, and secure payment terms. Nakaumi Viet Nam Co., Ltd offers flexible shipping options such as Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. To ensure a smooth transaction, buyers should verify import duties for HS Code 7318.15 in their destination country. Common payment methods for international B2B transactions include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P). All transactions and RFQs are facilitated through EximNext, a leading B2B marketplace designed to make cross-border trade secure and efficient.
Finding trustworthy partners is the foundation of successful importing. The supplier of this All Threaded Bolt Stainle has been verified on our platform. Whether you are a distributor, wholesaler, or procurement manager, you can request a free quotation, ask for product samples, and finalize your bulk purchase with confidence. EximNext hosts thousands of verified manufacturers and exporters across 200+ countries. Explore similar products in the Bolts category and connect with top-tier exporters on our comprehensive global B2B marketplace. Start your sourcing journey today.
Importing All Threaded Bolt Stainle requires careful attention to shipping logistics, customs compliance, and secure payment terms. Common shipping options include Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Buyers should verify import duties for HS Code 7318.15 in their destination country. Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P).
The current listed wholesale price for All Threaded Bolt Stainless from Nakaumi Viet Nam Co., Ltd is $0.65/Bags on FOB terms from Viet Nam. Prices may vary depending on order volume, packaging, and destination. For the most accurate bulk quote, send a direct RFQ to Nakaumi Viet Nam Co., Ltd through EximNext.
The supplier, Nakaumi Viet Nam Co., Ltd, has set a Minimum Order Quantity (MOQ) of 1 Bags for All Threaded Bolt Stainle. For sample requests or smaller trial orders, contact the supplier directly through our platform's inquiry system.
For international shipping and customs clearance, All Threaded Bolt Stainless is classified under HS Code 7318.15. Buyers should verify their local customs regulations to determine applicable import duties and taxes for this classification.
To import All Threaded Bolt Stainle from Viet Nam, negotiate shipping terms (FOB, CIF, or EXW) directly with Nakaumi Viet Nam Co., Ltd. Ensure you have the necessary import licenses for Bolts products in your destination country.
Yes, Nakaumi Viet Nam Co., Ltd is a verified supplier on EximNext. You can view their complete company profile, business registration details, certifications, and export history before placing a bulk order.
The key specifications for All Threaded Bolt Stainless supplied by Nakaumi Viet Nam Co., Ltd include SUS 304, SUS 316, SUS 310, SUS 403 (full thread/all-thread bolt), M6 - M24 (metric); W5/16 - W3/4 (imperial fractional), and 30mm - 4000mm. For a complete technical data sheet or Certificate of Analysis (COA), send an inquiry directly to the supplier through EximNext.
Nakaumi Viet Nam Co., Ltd offers All Threaded Bolt Stainle with standard export packaging. Custom packaging, private labeling, and OEM/ODM options may also be available for large wholesale orders.
All Threaded Bolt Stainle is actively imported by buyers worldwide. Request a destination-specific CIF or CFR quote from Nakaumi Viet Nam Co., Ltd through our platform.
Nakaumi Viet Nam Co., Ltd maintains international quality certifications. These ensure that the All Threaded Bolt Stainle meets international quality, safety, and regulatory standards required for cross-border trade.
Click "Request Quotation" on this product page, specify your required quantity, preferred shipping terms, and destination country. Nakaumi Viet Nam Co., Ltd will respond with a detailed wholesale quote including FOB pricing, lead time, and payment options.
Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), Documents against Payment (D/P), and Escrow services. Confirm accepted terms directly with Nakaumi Viet Nam Co., Ltd.
Discover more products in Bolts from verified suppliers worldwide.