Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›

The All New Light Carbon Trail MTB Frame LCFS958 is a hardtail-compatible full-suspension trail frame produced by Xiamen Ayn Carbon Fiber Composite Co., Ltd in Xiamen, Fujian, China. Its defining geometry includes a 67-degree head tube angle, 444.5 mm chainstay length, and extended reach for medium sizing, dimensions that place it in the modern trail bike category rather than cross-country or downhill. The frame is constructed from carbon fibre, though the specific fibre grade, resin system, and layup schedule are not disclosed in the source material.
The 67-degree head angle sits at the slacker end of the trail spectrum, balancing climbing efficiency with descent stability. Chainstays at 444.5 mm are moderately long for a medium frame, aiding traction on steep climbs while maintaining manual-wheelie balance. The extended reach measurement, not quantified in the source, typically adds 20-40 mm to traditional trail frames, allowing a shorter stem and wider bar setup for direct steering input. These figures suggest the frame targets riders who split time between technical singletrack and longer alpine traverses rather than dedicated race circuits.
Buyers include bicycle assembly workshops, niche brand startups, and distributors serving the trail and all-mountain segments. The frame's component compatibility claims require verification, fork axle standard, shock eye-to-eye and stroke, seat post diameter, and bottom bracket type are not stated in the listing. Trade specifics such as minimum order quantities, price brackets, and lead times are absent. The supplier's 0.00% response rate on the platform means buyers must pursue direct contact through the provided Xiamen address or independent channels to negotiate terms and confirm production capacity.
| Head Tube Angle | 67 degrees (slack, trail/all-mountain oriented) |
| Chainstay Length | 444.5 mm, fixed |
| Frame Reach | Extended for medium size (exact millimetres not stated, confirm with supplier) |
| Frame Material | Carbon fibre composite (fibre grade and resin not specified) |
| Intended Category | Trail MTB, typical 120-150 mm fork travel range (standard for 67-degree head angle) |
| Rear Axle Standard | Typical 12 x 148 mm Boost or 12 x 142 mm (not stated, confirm with supplier) |
| Seat Post Diameter | Typical 30.9 mm or 31.6 mm (not stated, confirm with supplier) |
| Bottom Bracket Standard | Typical PF92 or threaded BSA for trail frames (not stated, confirm with supplier) |
| Shock Eye-to-Eye / Stroke | Not stated (typical trail frames use 190 x 50 mm or 210 x 55 mm, confirm with supplier) |
| Fork Axle Standard | Typical 15 x 110 mm Boost (not stated, confirm with supplier) |
Xiamen Ayn Carbon Fiber Composite Co., Ltd is located on Guangxing Nan Road in Xinglin District, Xiamen, Fujian Province, a coastal city with established composite manufacturing infrastructure. The supplier's platform profile shows a harbor trust tier, the baseline verification level, with no recorded response rate or average response time. This lack of engagement metrics means buyers cannot rely on platform-mediated communication history to gauge supplier reliability or typical quotation speed.
The company profile provides no information about establishment year, factory floor area, number of employees, annual production capacity, or existing OEM brand relationships. No certifications, quality management systems, or product test reports are referenced in the listing data. Buyers should treat all unverified claims with due caution and request documentation of the LCFS958 frame's specific manufacturing and testing history before committing to volume orders. The Xiamen location offers access to port logistics, but this geographical advantage does not substitute for supplier-specific due diligence.
| Business Type | Supplier |
| Year Established | Recently Joined |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| Response Time | <4h |
| Response Rate | New Supplier |
Prior to ordering, demand that Xiamen Ayn Carbon Fiber Composite Co., Ltd provides frame fatigue test data to EN ISO 4210 or equivalent, with specific load cases and cycle counts for the LCFS958. Request video evidence of the testing process if third-party certification is unavailable. Verify the supplier's actual production location matches the listed Xiamen address, some listings use registered addresses that differ from manufacturing sites. Ask for sample frame weights measured on calibrated scales, not calculated estimates, and compare these against claimed figures. The absence of platform response history means reference checks from existing customers carry extra weight, seek contact details for current buyers if possible.
Shipping terms require explicit negotiation. Carbon frames demand careful packaging, typically individual expanded polystyrene inserts within double-wall cartons with fork and dropout protectors. Confirm whether the supplier provides this standard packaging or charges extra. Ask for FOB Xiamen Port pricing versus EXW factory terms, and obtain freight forwarder quotes for both scenarios. Lead times for carbon frames typically range 60-90 days for initial orders due to mould fabrication and layup curing cycles, though the supplier must confirm current scheduling. Payment structures for new relationships often involve 30% deposit with 70% against shipping documents, but letter of credit terms may be preferable given the limited verification data available.
Upon receipt, inspect frames for consistent wall thickness using ultrasonic thickness gauges at the down tube, top tube, and chainstay junctions. Check head tube reaming accuracy with a headset insertion test using known standard bearings. Examine the clear coat for orange peel, drips, or contamination that indicate inadequate finishing booth conditions. Documentation to retain includes material certificates for the carbon fibre prepreg, resin batch records, and any conformity declarations. Given the supplier's minimal platform engagement, consider arranging pre-shipment inspection through an agency with composite expertise in the Xiamen area. Establish a clear defect acceptance protocol before payment, including thresholds for cosmetic imperfections versus structural concerns that would trigger replacement or refund.
Active buying requirements from importers looking for Similar products
Compare alternatives, find similar products and connect with verified suppliers
When sourcing All New Light Carbon Trail Mtb Frame Lcfs958 for your business, securing the right balance of quality and cost is essential. Xiamen Ayn Carbon Fiber Composite Co., Ltd, a verified supplier based in China, offers this product for international export. By purchasing directly from the manufacturer or authorized exporter, buyers can negotiate favorable FOB prices starting at $570/Bags and manage bulk orders with a minimum order quantity (MOQ) of 1 Bags. This product is a staple in the Frames sector with strong demand from importing countries worldwide.
Importing All New Light Carbon Trai requires careful attention to shipping logistics, customs compliance, and secure payment terms. Xiamen Ayn Carbon Fiber Composite Co., Ltd offers flexible shipping options such as Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Common payment methods for international B2B transactions include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P). All transactions and RFQs are facilitated through EximNext, a leading import export marketplace designed to make cross-border trade secure and efficient.
Finding trustworthy partners is the foundation of successful importing. The supplier of this All New Light Carbon Trai has been verified on our platform. Whether you are a distributor, wholesaler, or procurement manager, you can request a free quotation, ask for product samples, and finalize your bulk purchase with confidence. EximNext hosts thousands of verified manufacturers and exporters across 200+ countries. Explore similar products in the Frames category and connect with top-tier exporters on our comprehensive online B2B marketplace. Start your sourcing journey today.
Importing All New Light Carbon Trai requires careful attention to shipping logistics, customs compliance, and secure payment terms. Common shipping options include Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Buyers should verify import duties in their destination country. Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P).
The current listed wholesale price for All New Light Carbon Trail Mtb Frame Lcfs958 from Xiamen Ayn Carbon Fiber Composite Co., Ltd is $570/Bags on FOB terms from China. Prices may vary depending on order volume, packaging, and destination. For the most accurate bulk quote, send a direct RFQ to Xiamen Ayn Carbon Fiber Composite Co., Ltd through EximNext.
The supplier, Xiamen Ayn Carbon Fiber Composite Co., Ltd, has set a Minimum Order Quantity (MOQ) of 1 Bags for All New Light Carbon Trai. For sample requests or smaller trial orders, contact the supplier directly through our platform's inquiry system.
The HS Code classification for All New Light Carbon Trail Mtb Frame Lcfs958 depends on the specific grade and form. Contact Xiamen Ayn Carbon Fiber Composite Co., Ltd through EximNext for the exact HS Code and customs documentation required for your destination country.
To import All New Light Carbon Trai from China, negotiate shipping terms (FOB, CIF, or EXW) directly with Xiamen Ayn Carbon Fiber Composite Co., Ltd. Ensure you have the necessary import licenses for Frames products in your destination country.
Yes, Xiamen Ayn Carbon Fiber Composite Co., Ltd is a verified supplier on EximNext. You can view their complete company profile, business registration details, certifications, and export history before placing a bulk order.
For a complete technical data sheet or Certificate of Analysis (COA), send an inquiry directly to Xiamen Ayn Carbon Fiber Composite Co., Ltd through EximNext.
Xiamen Ayn Carbon Fiber Composite Co., Ltd offers All New Light Carbon Trai with standard export packaging. Custom packaging, private labeling, and OEM/ODM options may also be available for large wholesale orders.
All New Light Carbon Trai is actively imported by buyers worldwide. Request a destination-specific CIF or CFR quote from Xiamen Ayn Carbon Fiber Composite Co., Ltd through our platform.
Xiamen Ayn Carbon Fiber Composite Co., Ltd maintains international quality certifications. These ensure that the All New Light Carbon Trai meets international quality, safety, and regulatory standards required for cross-border trade.
Click "Request Quotation" on this product page, specify your required quantity, preferred shipping terms, and destination country. Xiamen Ayn Carbon Fiber Composite Co., Ltd will respond with a detailed wholesale quote including FOB pricing, lead time, and payment options.
Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), Documents against Payment (D/P), and Escrow services. Confirm accepted terms directly with Xiamen Ayn Carbon Fiber Composite Co., Ltd.
Discover more products in Frames from verified suppliers worldwide.