Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›

The Sunrain all-in-one heat pump water heater is an air-source unit designed for residential domestic hot water production, extracting renewable thermal energy from ambient air to achieve operating efficiencies substantially above conventional electric resistance or gas-fired systems. The system integrates compressor, evaporator, condenser and enamel-lined storage cylinder into a single cabinet, eliminating the need for separate outdoor and indoor units. Key performance claims from the supplier include coefficient of performance levels that can reduce energy consumption by up to 80% relative to traditional gas boiler or electric water heater baselines, with maximum water temperature output of 75 degrees Celsius maintained through variable frequency compressor modulation.
At the core of the unit is a variable-frequency rotary compressor (brand not specified in source data) that adjusts speed in response to indoor and outdoor temperature conditions, a control strategy intended to optimise part-load efficiency and reduce acoustic output. The water tank interior is enamel-coated steel, a standard domestic hot water vessel construction that provides corrosion resistance against chlorinated municipal supplies. Thermal insulation consists of high-density polyurethane foam injected between the tank and outer casing, with the supplier noting this limits standby heat loss. The air-side heat exchanger employs hydrophilic-coated aluminium fin stock on copper tubing, a typical configuration for humid climates where condensate drainage and corrosion resistance are relevant. Reverse-cycle defrost is managed via a four-way reversing valve rather than resistive electric defrost, reducing energy penalty during frost removal cycles.
Primary applications are single-family and small multi-family residential installations where space constraints favour integrated rather than split-system architectures. The 75 degree Celsius maximum setpoint suits households with elevated temperature requirements or those in colder climate zones where lower source air temperatures degrade heat pump performance. Buyers should confirm whether the rated capacity corresponds to standard EN 16147 or similar test conditions, as manufacturer capacity figures often reflect 15 degrees Celsius air / 10 degrees Celsius water inlet conditions that may not translate to peak load scenarios. The supplier states 100% factory testing but does not detail specific test protocols or third-party certification status. Incoterms, minimum order quantities, lead times and warranty terms are not provided in the listing data and must be confirmed directly with Guangdong Sunrain Air Source Energy Co.,Ltd.
| Maximum Water Temperature | 75 degrees Celsius (supplier stated) |
| Tank Construction | Enamel-coated steel interior with polyurethane foam insulation |
| Defrost Method | Reverse-cycle via four-way valve |
| Heat Exchanger Coating | Hydrophilic aluminium fin (typical for corrosion-prone installations) |
| Compressor Type | Variable frequency rotary (brand unspecified in source) |
| Coefficient of Performance Range | Up to 80% energy saving versus gas/electric baseline (supplier claim, test conditions not stated) |
| Installation Configuration | All-in-one monobloc (indoor installation, no separate outdoor unit) |
| Control System | Intelligent controller with automatic frequency adjustment (typical inverter-driven heat pump architecture) |
| Factory Testing | 100% factory tested (protocol unspecified) |
| Typical Refrigerant Circuit Working Pressure | Standard R410A or R32 range, 2.5 to 4.2 MPa high side / 0.6 to 1.0 MPa low side (typical for residential air-source heat pumps, confirm with supplier) |
Guangdong Sunrain Air Source Energy Co.,Ltd. is located at No.73 De Fu Road, Xing Tan Town, Foshan City, Guangdong Province, 528000, placing it within China's concentrated appliance manufacturing corridor between Foshan and Guangzhou. The supplier holds a Harbor trust tier classification, which in marketplace terms indicates a baseline verification level; however, the response rate is listed at 0.00% with zero average response hours recorded, suggesting either a new listing, dormant account, or data capture anomaly. No information is provided regarding years in operation, factory floor area, employee count, annual turnover, or export markets served.
The listing presents the company as a manufacturer of domestic heat pump water heaters with emphasis on integrated all-in-one designs rather than split-system or commercial-scale products. No original equipment manufacturing relationships, distributor networks, or project references are disclosed. The supplier does not state ISO 9001, ISO 14001, CE marking, or other certification status in the provided data. Buyers should independently verify business registration, factory audit status, and whether the company maintains in-house compressor testing facilities or relies on component sourcing. The product description focuses on consumer-oriented efficiency claims rather than technical documentation suited to commercial procurement due diligence.
| Business Type | Supplier |
| Year Established | Recently Joined |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| Response Time | <4h |
| Response Rate | New Supplier |
Before placing an order with Guangdong Sunrain Air Source Energy Co.,Ltd., buyers should verify the company's current business licence and whether the entity listed matches the manufacturing facility or operates as a trading company. Request third-party test reports for the specific model, ideally from an accredited laboratory such as TUV, Intertek, or CQC, confirming performance claims under standard conditions. Confirm whether the product carries the China Compulsory Certification (CCC) mark and, for EU-bound shipments, whether CE marking and relevant conformity assessment documentation are available. The absence of response rate data means direct communication testing is essential before commitment.
Logistics arrangements from Foshan, Guangdong typically ship via Guangzhou or Shenzhen ports. Buyers should negotiate Incoterms that clarify responsibility for inland transport, export clearance, and marine insurance; common arrangements are FOB Shenzhen or CIF destination port, though the supplier does not state standard terms. Lead times, production capacity per month, and whether units are built to order or drawn from finished goods inventory must be confirmed directly. Payment structures for first transactions with Chinese appliance suppliers often involve 30% deposit with letter of credit or remaining payment against copy of bill of lading, but terms vary with relationship length and order volume.
Quality verification should include pre-shipment inspection under an agreed acceptance protocol, with particular attention to pressure testing of the refrigerant circuit, verification of compressor nameplate against specification, and insulation continuity checks. Request factory calibration certificates for any test equipment used in claimed 100% testing. For the enamel tank, inspect coating thickness and adhesion on a sample basis if feasible, or specify third-party inspection by agencies such as SGS or Bureau Veritas. Documentation to secure includes commercial invoice, packing list, bill of lading, certificate of origin, and any test reports or conformity certificates referenced in contractual specifications.
Active buying requirements from importers looking for Similar products
Compare alternatives, find similar products and connect with verified suppliers
When sourcing All In One Heat Pump for your business, securing the right balance of quality and cost is essential. Guangdong Sunrain Air Source Energy Co.,Ltd., a verified supplier based in China, offers this product for international export. By purchasing directly from the manufacturer or authorized exporter, buyers can negotiate favorable FOB prices starting at $50/Bags and manage bulk orders with a minimum order quantity (MOQ) of 1 Bags. This product is a staple in the Industrial Pumps sector with strong demand from importing countries worldwide.
Importing All In One Heat Pump requires careful attention to shipping logistics, customs compliance, and secure payment terms. Guangdong Sunrain Air Source Energy Co.,Ltd. offers flexible shipping options such as Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Common payment methods for international B2B transactions include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P). All transactions and RFQs are facilitated through EximNext, a leading B2B marketplace designed to make cross-border trade secure and efficient.
Finding trustworthy partners is the foundation of successful importing. The supplier of this All In One Heat Pump has been verified on our platform. Whether you are a distributor, wholesaler, or procurement manager, you can request a free quotation, ask for product samples, and finalize your bulk purchase with confidence. EximNext hosts thousands of verified manufacturers and exporters across 200+ countries. Explore similar products in the Industrial Pumps category and connect with top-tier exporters on our comprehensive global B2B marketplace. Start your sourcing journey today.
Importing All In One Heat Pump requires careful attention to shipping logistics, customs compliance, and secure payment terms. Common shipping options include Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Buyers should verify import duties in their destination country. Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P).
The current listed wholesale price for All In One Heat Pump from Guangdong Sunrain Air Source Energy Co.,Ltd. is $50/Bags on FOB terms from China. Prices may vary depending on order volume, packaging, and destination. For the most accurate bulk quote, send a direct RFQ to Guangdong Sunrain Air Source Energy Co.,Ltd. through EximNext.
The supplier, Guangdong Sunrain Air Source Energy Co.,Ltd., has set a Minimum Order Quantity (MOQ) of 1 Bags for All In One Heat Pump. For sample requests or smaller trial orders, contact the supplier directly through our platform's inquiry system.
The HS Code classification for All In One Heat Pump depends on the specific grade and form. Contact Guangdong Sunrain Air Source Energy Co.,Ltd. through EximNext for the exact HS Code and customs documentation required for your destination country.
To import All In One Heat Pump from China, negotiate shipping terms (FOB, CIF, or EXW) directly with Guangdong Sunrain Air Source Energy Co.,Ltd.. Ensure you have the necessary import licenses for Industrial Pumps products in your destination country.
Yes, Guangdong Sunrain Air Source Energy Co.,Ltd. is a verified supplier on EximNext. You can view their complete company profile, business registration details, certifications, and export history before placing a bulk order.
For a complete technical data sheet or Certificate of Analysis (COA), send an inquiry directly to Guangdong Sunrain Air Source Energy Co.,Ltd. through EximNext.
Guangdong Sunrain Air Source Energy Co.,Ltd. offers All In One Heat Pump with standard export packaging. Custom packaging, private labeling, and OEM/ODM options may also be available for large wholesale orders.
All In One Heat Pump is actively imported by buyers worldwide. Request a destination-specific CIF or CFR quote from Guangdong Sunrain Air Source Energy Co.,Ltd. through our platform.
Guangdong Sunrain Air Source Energy Co.,Ltd. maintains international quality certifications. These ensure that the All In One Heat Pump meets international quality, safety, and regulatory standards required for cross-border trade.
Click "Request Quotation" on this product page, specify your required quantity, preferred shipping terms, and destination country. Guangdong Sunrain Air Source Energy Co.,Ltd. will respond with a detailed wholesale quote including FOB pricing, lead time, and payment options.
Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), Documents against Payment (D/P), and Escrow services. Confirm accepted terms directly with Guangdong Sunrain Air Source Energy Co.,Ltd..
Discover more products in Industrial Pumps from verified suppliers worldwide.