reflow soldering machine — 2 Products

Features: 1.Use Windows operation interface, easy to operate; 2.Leading heating mode, solve the corner when the reflow soldering welding problem, suitable for CSP, BGA, 0201 chip, and other electrical components of the welding; 3.Professional rotor design, wind speed stability, effectively prevent the PCB heating uniformity of the wind, to the repeated heating of the highest; 4.Compulsory independent loop to various temperature zones, independent PID control, and independent heating mode, make the furnace chamber temperature accurately, even, heat capacity is big. 5.Thermal insulation layer is made of high quality aluminum silicate insulation materials, heat preservation effect is good, warming faster, from room temperature to the working temperature of 15 minutes. 6.Furnace, lead-free green design; 7.High quality high temperature and high speed motor transport wind smoothly, little vibration, low noise; 8.Furnace using cylinder jack-up, safety rod support, safe and convenient; 9.The transmission way of PCB machine adopts automatic electronic speed, chain network ,synchronization, good stability; 10.Special high quality aluminum alloy guide, automatic refueling system, ensure guide rail adjusted the service life of the high precision and wide; 11.Equipped with UPS power protection function, ensure the normal output after power PCB, avoid damage; 12.Powerful software function, the PCB online temperature measurement, and analyze the data curve at any time, storing and printing; 13.PC and PLC communication with PC/PP agreement, stable work, put an end to crash; 14.Automatic monitoring and display equipment working state; 15.Special furnace design, good heat preservation, adopt special heating element, heat with highefficiency, power consumption of the lowest.

Reflow/wave soldering machine reflow: Dependable and steady conveying system and effective device. 1. Unique transportation lead rail design, adopts good quality aluminum alloy. The intensity is high, the distortion is small, the precision the high, the parallel degree isf+0.5mm 2. Automatic adding oil system controlled by computer. Adding oil automatically. Adding oil to lubricate conveying chains and central support chains during normal operating time every a period of time. 3. Delayed time output when the power is off. When the city power is not provided with, conveying chains may output continuously PCB board inside the stove, prevent the PCB board from burning. Special nitrogen/rosin recycling cooling filtering system 1. Recycle the weld wasted air forcibly with seal. Recycle and reuse the nitrogen through special big capacity cooling filter system. 2. Huge capacity rosin filter, full seal, keep nitrogen density, no man cleaning. High efficiency nitrogen flux control system 1. Adopt Japanese control valve control nitrogen flux, according to welding density requirement scope to adjust automatically nitrogen flux in the welding section. Reduce nitrogen consumption. Let nitrogen in and let oxygen out quickly, oxygen content in the stove decrease to ppm in 10 minutes. Systematic function 1. Conveyor Speed, Hot wind speed, controlled by the computer. 2. Built-in UPS and power off protection function 3. Various over loading will stop the correspond epuiqment.Built-in UPS and power off protection function 4. Turn off all epuiqment when Emerency Stop is pressed. 5. Conveyor speed close-loop ontvolled accurately 6. Built-in over-temp Alarm function, and display on the screen. 7. Operate "turn off" "delay turn-off" "Reset" "Parameter setting" "profile testing" by the computer. 8. With temp- profile analysis function and saved as Data or Graph files. 9. PID self-tuning control, With f+1fªC accuracy. 10. PID output time-sharing to reduce down the MAX Power. 11. Product amounts counts and display on the screen. 12. With fast sampling rate for 10pcs/sec, thermal-open alarm function. 13. With embedded-in real-time control, system function runs inde pendently, not depending on PC. 14. Board I/O, A/D, power is isolated for EMC Design. 15. PCB current staus for real-time display In the pot. 16. With MYSQL NET data management, easy for ERP/MRPII system integration. 17. SSR failure sensing function, and turn off the system power to prevent from accident. High efficiency advanced carrying wind and heating system 1. Carry the wind independently in each temperature zone. Adopt closed ring PID to control. The temperature control is accurate. The control precision is high. 2. Unique carrying wind mode, the wind force is even, which covers every corner of the stove, the temperature is even, the heat efficiency is high. 3. Carrying wind recycles independently in the temperature section. Heat independently up and down. The firepot temperature is accurate and even. The heat capacity is huge and easy to adjust. 4. Over temperature warp alarm. Over oxygen content and falling down board alarm, malfunction diagnosis, sound & light alarm. 5. The starting power is small, the temperature increases quickly, Temperature increasing time from room temperature to working temperature s less than 20 minutes. 6. Normal use consumption power is small, temperature steady consumption power is 8 KW. 7. Adopt imported electromotion actuator to hoist on the top cover of the furnace body. Safe bar supports and the safety is dependable. 8. Good quality and bearing high temperature motor carry wind. The carrying wind speed is steady, the noise is small, the vibration is small. Features 1. Windows 2000 operation system, the dependability is high, the operation speed is quick, the communication is steady, the management is convenient and may connect with LAN. 2. Chain ,central support and web belt are in-phase which prevent PCB from distorted when heated or the board falling down. 3. Good quality nitrogen protect device, adopt Japanese control valve to control flux, save nitrogen consumption 30%. 4. Cooling temperature control, control effectively cooling decrease. 5. Conveying chains drop oil automatically to lubricate. 6. Alarm record and motion incident record may store, inquiry and trace back conveniently. The longest time to store is one year. 7. Special soldering recycle system make sure soldering quality and keep clean. 8. Heat recycle efficiency is high, starting power is Iow, increase the temperature quickly, the increasing temperature time is less than 20 minutes, the use power is small, thenormal power is only 8 KW. 9. Carrying wind adjust speed without grade, may adjust at random according to PCB board and components feature, which make the best soldering effect. 10. Use big capacity UPS, which keep conveying and micro-computer output when the power is off. 11. Enact at random to open the machine, close the machine time automatically. Full automation and half automation switch, realize the automation without man operation. 12. Each temperature zone control the temperature independently. Adopt the closed ring PID control mode, control precision is high. Mode CY-821(N) Figure size L4800 f+W1345f+A1437 Weight 1700kg Power supply 3PH AC380V 50 / 60HZ Starting power/starting power 40KW / 8KW PCB biggest width 450mm Conveyor effective height f+30mm Conveyor speed 0~1800mm / min Adjust width mode adjust the width with electromotion Chains lubrication drop oil automatically Conveyor direction left-right (right-left), may choose Conveyor mode chains+web belt or chains+central support Furnace body open and closed mode Hoisting with self-lock and electromotion Temperature control section 18 Temperature control scope Cnormal temperature-300fª Temperature control mode closed ring control Temperature collect precision 0.1fªC Temperature collect precision f+1fªC PCB horizontal warp f+2fªC Cooling mode cooling wind recycles to be cooled Carrying wind speed control 0~2800r/min adjust the speed without grade Abnormal alarm Flame couple is abnormal, overemperaturre, fallinging down board, over oxygen content in nitrogen. Parameter store store many parameters Incident record store for one year Temperature increasing time f-20min Nitrogen consumption 20m3 / h Protection when the power is off Delaying time for output Operation system Windows2000 Temperature curve test Produced related parameter automatically wave: Features 1. Lead-free process, environment protection design. 2. Adopts irregular internal furnace and open streamlining appearance. 3. Specially made aluminum alloy sideway, with high strength and high hardness. 4. Automatic synchorous plate connecting device, stable and smooth plate connection. 5. Superior titanium claw type chain, with high elasticity, no easy of distortion, corrsion resistant. 6. Closed constant pressure flux spray system, ensures the stability of spray pressure. Flux automatic follow-up system: continuous reciprocal type spray is adopted, spray area, time are automatically regulated with the width of PCB board and speed change. 8. Equipped with double-layer waste gas filter board for rosin, effectively reduce pollution 9. Preheating device: powerful hot wind system, sent hot wind evenly to the bottom of PCB board. Direct draw-out modular design is adopted, convenient for cleaning. 10.Preheat compensation function, temperature drop by f-2fªC before PCB board enter tin oven. 11. Spray current wave crest: spiral spray design, weld the shaded part of SMT components perfectly. 12. Precise current wave crest: advanced plane current technology, very little tin oxide, the laminar flow wave makes tin point Approach perfection. 13. Double waves of tin oven adopt stepless frequency change, control height of wave crest independently. 14. Automatic claw cleaning device: inported superior micro-water pump, detergent is propylene, clean chain claw automatically. 15.Chilling system: cold wind is -10fªC, PCB temperature fall, with cold wind for -8fªC/sec, without cold wind -3fªC/sec. 16. Economical running: tin wave lift up and go down with PCB board, daily tin oxide can reduce max 30%. 17. Automatic darm function of dramatic temperature change, PCB board tracks and counts automatically. 18. The machine above , following is controlled , There are certain stabilities