Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›

The wing nut offered by Knoten Engineering LLP is a hand‑operable fastener with two wing‑shaped projections for tool‑free tightening. It is supplied in stainless steel 304/316, zinc‑plated carbon steel and brass grades. The product complies with DIN 315 and ASME B18.17 standards and is available in metric thread sizes from M4 up to M24 as well as the equivalent imperial sizes. Each unit is shipped in bulk cartons or bags containing between 100 and 1 000 pieces.
Stainless steel 304 provides good corrosion resistance in humid environments, while the zinc‑plated carbon steel variant offers a cost‑effective alternative with a sacrificial coating. Brass versions are preferred where non‑magnetic properties are required. Typical wing projection length is about 10 mm, giving sufficient leverage for rapid assembly. The tensile strength of the stainless steel version is typical around 500 MPa, matching common industry expectations for fasteners of this class.
These wing nuts are widely used in light fixtures, mechanical equipment and electrical enclosures that need frequent disassembly. OEMs, maintenance contractors and electrical installers often source them in large quantities to support production lines or service operations. Buyers should confirm the exact MOQ, lead time and preferred Incoterms directly with Knoten Engineering LLP before placing an order.
| Material | Stainless Steel 304 / Carbon Steel Zinc Plated / Brass |
| Standard | DIN 315 (metric) and ASME B18.17 (imperial) |
| Thread size range | M4 to M24 (metric) and 1/4" to 1" (imperial) |
| Finish / Coating | Zinc plating on carbon steel version |
| Packaging | Bulk cartons or bags, 100 - 1000 pieces per unit |
| Wing projection length | Typical 10 mm |
| Tensile strength | Typical 500 MPa for stainless steel 304 |
| Corrosion resistance | Standard good resistance for stainless steel 304 and zinc‑plated carbon steel |
Knoten Engineering LLP is located at 19&19‑b, Ashutosh Estate, Opp Radhe Estate, Kadadra Road, Zak, Ta. Dehgam, Gandhinagar, Gujarat 382330, India. The supplier is listed with a harbor trust tier, indicating a verified business profile on the platform. Their response rate is currently 0 %, with no recorded average response time, suggesting that communication may need to be initiated proactively.
The company focuses on manufacturing and supplying fasteners, including wing nuts, to domestic and international markets. Their catalogue emphasizes compliance with DIN and ASME standards, and they handle bulk packaging suitable for export shipments. No additional certifications, production capacity or client references are disclosed in the listing, so buyers should request any required documentation.
Wing nuts are hand-operable fasteners featuring two wing-shaped projections for tool-free tightening and loosening, ideal for applications requiring frequent assembly and disassembly such as light fixtures, mechanical equipment, and electrical enclosures. Available in stainless steel 304/316, zinc-plated carbon steel, and brass grades, they are manufactured to DIN 315 or ASME B18.17 standards with metric and imperial thread sizes from M4 to M24. Wing nuts are traded globally in bulk cartons or bags with 100-1000 pieces per unit, making them a high-volume fastener commodity in international trade.
| Business Type | Supplier |
| Year Established | Recently Joined |
| Employees | Contact Supplier |
| Annual Revenue | Contact Supplier |
| Main Products | View Products Tab |
| Major Markets | Global |
| Response Time | Contact Supplier |
| Response Rate | New Supplier |
Before placing an order, verify the material grade, standard compliance and any required certifications such as ISO 9001 or material test reports. Request a sample or a mill test certificate to confirm that the wing nuts meet the DIN 315 or ASME B18.17 specifications you need for your application. Checking these details early reduces the risk of receiving non‑conforming fasteners.
Confirm the logistics details with Knoten Engineering LLP, including the preferred Incoterm (for example FOB Gandhinagar or CIF Mumbai), expected lead time and the exact packaging configuration. Because the supplier’s response rate is currently 0 %, initiate contact well in advance to negotiate payment terms and shipping schedules. Align the shipment size with your warehouse capacity to avoid handling issues.
Arrange a third‑party inspection or request an in‑process quality audit to ensure the wing nuts meet dimensional tolerances and surface finish requirements. Typical inspection points include thread pitch, wing projection length and coating thickness for the zinc‑plated version. Obtain the inspection report and any relevant certificates before the goods are released for shipment.
Active buying requirements from importers looking for Similar products
Compare alternatives, find similar products and connect with suppliers
When sourcing Wing Nut for your business, securing the right balance of quality and cost is essential. Knoten Engineering LLP, a supplier based in India, offers this product with key specifications including Industrial Grade / A2 (304) / A4 (316), SS 304: Cr 18%, Ni 8%; Carbon Steel: Low Carbon C<0.25% with Zinc Plating, and M4 to M24 (Metric); 1/4" to 1" (Imperial); Wing Spread 16mm - 50mm. By purchasing directly from the manufacturer or authorized exporter, buyers can negotiate favorable FOB prices starting at $0.08 – $0.35 / pc and manage bulk orders with a minimum order quantity (MOQ) of 1 Unit. This product is actively traded under HS Code 7318.16, making it a staple in the Fasteners sector with strong demand from importing countries worldwide.
Importing Wing Nut requires careful attention to shipping logistics, customs compliance, and secure payment terms. Knoten Engineering LLP offers flexible shipping options such as Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. To ensure a smooth transaction, buyers should verify import duties for HS Code 7318.16 in their destination country. Common payment methods for international B2B transactions include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P). All transactions and RFQs are facilitated through EximNext, a leading global B2B marketplace designed to make cross-border trade secure and efficient.
Finding trustworthy partners is the foundation of successful importing. Ask the supplier of this Wing Nut for business registration and quality documents before ordering. Whether you are a distributor, wholesaler, or procurement manager, you can request a free quotation, ask for product samples, and finalize your bulk purchase with confidence. EximNext hosts thousands of manufacturers and exporters across 200+ countries. Explore similar products in the Fasteners category and connect with top-tier exporters on our comprehensive import export marketplace. Start your sourcing journey today.
Importing Wing Nut requires careful attention to shipping logistics, customs compliance, and secure payment terms. Common shipping options include Full Container Load (FCL) or Less than Container Load (LCL) via sea freight. Buyers should verify import duties for HS Code 7318.16 in their destination country. Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), and Documents against Payment (D/P).
The current listed wholesale price for Wing Nut from Knoten Engineering LLP is $0.08 – $0.35 / pc on FOB terms from India. Prices may vary depending on order volume, packaging, and destination. For the most accurate bulk quote, send a direct RFQ to Knoten Engineering LLP through EximNext.
The supplier, Knoten Engineering LLP, has set a Minimum Order Quantity (MOQ) of 1 Unit for Wing Nut. For sample requests or smaller trial orders, contact the supplier directly through our platform's inquiry system.
For international shipping and customs clearance, Wing Nut is classified under HS Code 7318.16. Buyers should verify their local customs regulations to determine applicable import duties and taxes for this classification.
To import Wing Nut from India, negotiate shipping terms (FOB, CIF, or EXW) directly with Knoten Engineering LLP. Ensure you have the necessary import licenses for Fasteners products in your destination country.
Open the Knoten Engineering LLP company profile on EximNext to see the details the company has provided. Before a bulk order, ask for business registration, certificates and export documents, and consider a sample or a small trial order.
The key specifications for Wing Nut supplied by Knoten Engineering LLP include Industrial Grade / A2 (304) / A4 (316), SS 304: Cr 18%, Ni 8%; Carbon Steel: Low Carbon C<0.25% with Zinc Plating, and M4 to M24 (Metric); 1/4" to 1" (Imperial); Wing Spread 16mm - 50mm. For a complete technical data sheet or Certificate of Analysis (COA), send an inquiry directly to the supplier through EximNext.
Knoten Engineering LLP offers Wing Nut with standard export packaging. Custom packaging, private labeling, and OEM/ODM options may also be available for large wholesale orders.
Wing Nut is actively imported by buyers worldwide. Request a destination-specific CIF or CFR quote from Knoten Engineering LLP through our platform.
Knoten Engineering LLP maintains international quality certifications. These ensure that the Wing Nut meets international quality, safety, and regulatory standards required for cross-border trade.
Click "Request Quotation" on this product page, specify your required quantity, preferred shipping terms, and destination country. Knoten Engineering LLP will respond with a detailed wholesale quote including FOB pricing, lead time, and payment options.
Common payment methods include Letter of Credit (L/C), Telegraphic Transfer (T/T), Documents against Payment (D/P), and Escrow services. Confirm accepted terms directly with Knoten Engineering LLP.
Discover more products in Fasteners from suppliers worldwide.