Import Ball And Fittings — Buy in wholesale FOB from Supplier in India

Elpar Industries And Suppliers manufactures Ball End Fittings conforming to DIN standards from En1a free-machining low carbon steel with lead addition, supplied from Pune, Maharashtra, India. The En1a grade (BS 970 designation, equivalent to 1.0718 / 9SMn28 under EN 10277-2) contains 0.10-0.15% carbon, 0.90-1.20% manganese, and 0.20-0.35% sulphur with intentional lead addition of 0.15-0.35% to improve machinability. This lead-bearing free-machining steel achieves machining speeds 30-40% higher than comparable low-carbon grades while maintaining sufficient tensile strength of 390-540 MPa in the normalised condition for static and moderate-dynamic loading applications. The supplier offers both standard DIN-specification products and customised Ball Pin Assembly configurations to customer drawings.

The DIN standards referenced typically include DIN 71802 for ball joints and socket connections, DIN 71805 for angle ball joints, or DIN 71803 for ball studs, though the specific DIN number should be confirmed with the supplier for each order. En1a steel machines with short, brittle chips due to the manganese sulphide and lead inclusions, reducing tool wear and improving surface finish to Ra 1.6-3.2 micrometres in turned operations. Surface treatment is zinc plating, typically applied as zinc electroplating with chromate passivation (blue or yellow) providing 5-8 micrometres coating thickness and 240-hour minimum salt spray resistance per ASTM B117 for the white corrosion protection category. The low carbon content of 0.10-0.15% ensures good weldability for assemblies requiring subsequent fusion welding, though the lead content produces toxic fumes during welding requiring adequate extraction.

Primary applications span automotive linkages, control cables, furniture hardware, medical equipment adjustments, and defence ordnance mechanisms where smooth articulation and repeatable angular movement are required. Ball Pin Assemblies combine the machined ball fitting with a hardened steel pin, circlip or cotter retention, and sometimes a polymer socket liner for noise reduction. The supplier states production capacity of 25,000 pieces and packaging to customer requirements. Buyers in automotive and defence sectors should verify that En1a material certificates include full chemical analysis, tensile test results, and lead content declaration to meet ELV (End-of-Life Vehicles) and RoHS regulatory requirements, as lead-bearing steels face increasing restriction in certain applications despite their machining advantages.

Elpar Industries And Suppliers operates from S.no 64, Handewadi Road, Indira Nagar, Near Mango Tree, Hadapsar, Pune 411028, Maharashtra, India, positioning the company within the Pune industrial corridor with access to the Mumbai-Pune expressway and JNPT seaport for export shipments. The supplier holds a Harbor trust tier classification with a 0.00% platform response rate and no recorded average response hours, indicating minimal or no historical engagement through digital inquiry channels. The company profile identifies itself as a manufacturer rather than trader, with stated production capacity and custom manufacturing capability for Ball Pin Assembly configurations.

The Hadapsar location places operations in an established Pune manufacturing zone with engineering and automotive component supplier concentration, including proximity to Tata Motors, Bajaj Auto, and tier-one automotive supply chains. The supplier does not state ISO 9001, IATF 16949, AS9100, or other quality system certifications, nor does it indicate defence production facility registration or DGQA approval despite mentioning defence applications. No information is provided about company founding date, employee count, annual revenue, specific major clients, or export experience. Buyers should conduct independent verification of manufacturing capability, including on-site audit or third-party inspection, given the limited platform-verified credentials.