从China供应商批量进口Cleaner

Material: stainless steel the density of the slurry is different from the slurry impurities Slag separator, it is a kind of using the theory of centrifugal to get rid of slurry density is different from the pulp of impurities of equipment, upper slag machine adopt stainless steel material, lower injection for polyurethane material, main wall designs for the spiral cone. Slag separator can be used in all kinds of pulp purification system, mainly to remove slurry density is greater than the size of sand, iron and other impurities (heavy slag) clock and density is less than the size of such as mixed sticky powder, paraffin wax, heat melt glue, plastic, foam, gas, light impurities such as ink particles (light slag separator). Low concentration slag eliminator: TH series of low-concentration slag separator is the principle of centrifugal separation of eddy current. The slurry of the pressure can be entered from the inlet of the cutting edge in the direction of the tangential direction, and the eddy motion of high speed in the cone is separated. The vortex in the axial direction of the separation tube is led to the end of the cone, and the heavy impurities in the slurry are thrown into the wall of the wall and discharged from the lower end. The slurry gathers to the center of the separation tube and forms the main slurry flow, which is sent out from the upper part of the slurry to the next process. Structure that 1. The TH heavy slag removal device can be designed to be open and closed in two types of scum based on user requirements. 2. There are three kinds of arrangement of TH heavy slag eliminator: single - sided, single - sided and double - sided. 3. The TH heavy slag can be designed for more than one stage according to the production and user's requirements, and can be designed for multi-stage multi-stage in special circumstances. 4. The TH heavy slag eliminator is generally supplied in bulk, and the user can assemble and use it according to the arrangement form. Its main parts are in and out of the slurry main body, frame, slag removal, tail slurry (pipe), pressure gauge, ball valve, ceramic scum, etc.