从India供应商批量进口Cartridge Heaters

MAGMA cartridge heaters are suitable, appropriate devices for applying concentrated heat to solid metal components. Cartridge heater is somewhat similar to tubular heaters structurally but with higher watt densities, usually custom manufactured to size, sheath, leads, terminals, wattage and voltage as per application or requirement. Cartridge heaters are used in restricted working areas where localized heating is required for close thermal control. MAGMA manufactures wide range of cartridge heaters for different numerous applications like heating liquids (Water, Oil and Glues), Gases such as Air and Solids such as Metal Dies. MAGMA manufactures 2 types of Cartridge heaters: HIGH WATT DENSITY Swaged or High Watt Density Cartridge Heaters composed of resistance wire (NiCr) spirally wound on MgO core as per watt density decided. It is inserted in metallic tube selected as per requirement and space filled with high purity MgO powder. Then it is swaged to compact the loosely filled powder inside for achieving high dielectric strength up to the desired size, diameter and wattage is achieved. The heat generated by resistance wire is quickly dissipated or transferred to the outer sheath. It is machined to precise tolerances and straightness. Swaged or High Watt Density Cartridge Heaters are fitted into accurately reamed, parallel sided holes for useful life and fantastic performance. It can operate at higher temperature and vibration applications. STANDARD or LOW WATT DENSITY Low Watt Density Cartridge Heaters comprises of helical coil (NiCr resistance wire) passed from refractory core and inserted in metallic tube which is predecided by size, diameter and sheath. The remaining space in the tube is MgO powder filled but not compacted by machine. The end cap is then inserted on the bottom of the heater and insulated leads are installed.