从China供应商批量进口Ntc Thermistor Temperature Sensor

Application:Application ? air conditioners, refrigerators, freezers, water heaters, water dispensers, heaters, dishwashers, disinfection cabinet, washing machines, dryers and other appliances on. ? car air conditioners, water temperature sensor, intake air temperature sensor, engine ? Switching power supply, UPS uninterruptible power supply, inverter, electric boilers, etc. ? smart toilet, electric blankets, etc. The Product Sells Point: Key Specifications/Special Features: A: Size chart MF52 NTC with epoxy to lead Note: The size and wire color according to customer requirements! II: Product Features: 1: MF52 series of products for the lead with an epoxy coating type 2: Wide range of resistance: 0.1KO ~ 500KO 3: Resistance and B value of high accuracy 4: moisture proof, good insulation, high reliability, small time constant 5: small, reflecting the speed 6: is stable for a long time, consistency 7: Operating temperature range: -40 ~ 125 ? 3: Product Applications: Air-conditioning equipment, heating equipment, medical equipment, temperature control instrumentation, electronic gifts, electronic hygrometer, car thermometer, electronic calendar, rechargeable battery pack and charger, laptop batteries. Four: Model Description MF 52 103 F 3950 ? ? ? ? ? ?MF ¬-- negative temperature coefficient (NTC) thermistor Code. ?52-- epoxy encapsulated NTC thermistor temperature sensor. ?103 - thermistor nominal resistance, indicating that the nominal resistance of the resistance: 10 × 103 (O). Error ?F-- resistance value (accuracy) is: F = ± 1%, G = ± 2%, H = ± 3%, J = ± 5% ?3950-- thermal resistance index (material factor) B is: 395 × 10 (K) Five: MF52 Series Model Specification Note: according to customer requirements, provide different resistance, B value precision, customization. NTC thermistor measurements must note the following: • can not be measured in the air, the larger the difference in air temperature measurement inaccurate, resulting accuracy deviation. • After using the high-precision measurements of the bath, measured after NTC into the bath, the bath temperature must be stable before measurement. • Measure the voltage as low as possible in order to reduce measurement errors due to self-heating NTC. • High temperature measurement, required temperature bath thermometer correction, check